NEW RADIUS ARM - DRY SUSPENSION R/H
NAM7162

£157.50 exc vat

£189.00 inc vat

In stockIn stock
Brand new R/H dry suspension radius arm with bushes fitted and ready to fit but less pin and washers etc, so kit GSV1125 required.

£157.50 exc vat

£189.00 inc vat

In stockIn stock

Recommended usage 1 x NAM7162 to fit one mini.
Rear Radius Arms, Cone Suspension - Qty 1
Rear Radius Arm and Bearings - Qty 1

Recommended products

Small O ring seal introduced from 1996 for later MPI cars.Sold singly

introduced as a technical bulletin by Rover to stop debris or rust penetrating bearing areas which caused failure.This ring fitted on the stub axle against the radius arm ...

Alternative products

New arm and kit seperate. This is a new dry suspension radius arm ready bushed with a spindle kit supplied seperate. This is sold on an outright basis especially for mini owners building a car or overseas customers who are unable to return their old ...

Kit products

New arm and kit seperate. This is a new dry suspension radius arm ready bushed with a spindle kit supplied seperate. This is sold on an outright basis especially for mini owners building a car or overseas customers who are unable to return their old ...

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.

The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...

All models of the Mini use the same rear hub (this piece holds the rear wheel bearings). The Mini's rear wheel bearings are more than adequate, usually requiring only occasional repacking with grease. The weak link may be the cast iron hub; it is not...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

Koni Shocks Possibly the best name in shock absorbers, and they're available for the lowered Mini! Sold singly but recommend fitting pairs

see C-STR1675 for performance details.



Please note some small modifica...

Exchange arms for dry suspension, later type with a bush and bearing.

We will not accept very early 2 bronze bush type from the 1959/60 era or any arms if they are bent or damaged. If you've ever had to rebuild a Mini trailing arm you know w...

Complete rebuild kit for rear radius arm as sold by us since 2005.

Beware of cheap imports that are available in the market as they do not have correct heat treatment where required and have no longevity.

Kit Includes: shaft, beari...

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

Mini Spares product from own original tooling since 1989.This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the R/H rear radius/trailing arm.

This shroud uses 14A7091 rubber plug not suppl...

See-Mini Spares own UK made GSV1118EVO first for a correct upgraded version with an improved poly gaiter and original genuine cup on EN24T pin with correct shape ball for a great value item.

Mini Spares own part will out surviv...

Correct size split pin for the rear hub nut and the early smaller type CV joint GCV1105 fitted to drum brake cars and cooper small discs.

Split pin for common clevis pin list

GFK101 for CLZ409 ...

These are the metal rods required to fit your Hilo kit to the rear of a mini.

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

For the front wheel bearings of the Spridgets, rear of the Mini.

This outer bush 2A7325 on the radius arm is bronze and needs reaming out when fitted. The inner ATJ4098 is a roller bearing--all parts are in a new kit GSV1125

Mini Spares product from own original tooling since 1989.

This small sheet metal panel mounts below the horizontal seam, covering the pivot pin of the rear L/H radius arm. Was unavailable for many years.

This shroud uses [link]14A7...

Replacement rubber cone produced from original factory tooling to the original specification, complying to the original Rover/BMC drawing and manufactured in the UK and easily identifiable by having the original patent number "763432" moulded in to t...

Rear progressive bump stop kit for hydrolastic cars. Mounting brackets and rubbers. The rearward pitch under hard acceleration can be minimized by the fitting of progressive bump stop kits. This also improves the car's handling when fully loaded.