(¥6) £6.10 exc vat
(¥7) £7.32 inc vat
In stock
A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.
Cable to carb bolt is ACC5062.
(¥6) £6.10 exc vat
(¥7) £7.32 inc vat
In stockRecommended usage 1 x C-AHT85 to fit one mini.
This clip fits on the pedal to help retain the throttle cable-
It was obsolete but the spring on the carb end keeps it from sliding out anyway. Probably just a security feature on HS4 carbs at the time.
Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...
Standard Mini throttle cable, fitment from 1959 through to 1990 and all HS carbed minis. Not suitable for cars with HIF38, HIF44, SPI and Twin point.
SU conversion Jet for conerting from a waxstat jet to conventional without having to buy a different linkage etc.
This is the original type of needle valve that governs the plastic fuel float in your SU carb.
An alternative better upgraded version is available as CA90.
The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...
Small hose clip for 1/4" fuel line (our part number PETROLPIPE)
Linkage set for Converting from waxstat to standard type jet for one single carb .
For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit
Genuine Weber 45DCOE Carb, calibration from the factory is as below:
Choke 36
Throttle Plate Angle 78 degrees
Auxiliary Venturi 4.5
Needle Valve 200
Main Jet 145 Pump Jet 45...
complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only
complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc
For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...
THIS CARB IS A GREAT TUNING AID ON TUNED ENGINES, ESPECIALLY 1380cc.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.