(¥2) £1.80 exc vat
(¥2) £2.16 inc vat
In stock
(¥2) £1.80 exc vat
(¥2) £2.16 inc vat
In stockRecommended usage 8 x ENJO-1040 to fit one mini.
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub on the inside. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will ...
Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub on the inside. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will ...
This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...
50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).
For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.
This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...
This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...
HEX HEAD NUT FOR 2010 ON MAMBA WHEELS BOTH 6X10 AND 6X12 WHEELS
Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by wheel sockets. This uses 17mm socket.
Plain spun ally centre cap for the original 10" steel wella wheel. 63mm rear fitting cap, 45MM DEEP with logo face of 45mm.
white sticker for fitting black centre caps which then make this look bolder, as fitted to Monte Carlo and Mini 35SE.
Vehicle centre caps and winged bonnet badge emblems chart from 1990 on
Black plastic cap Sticker 50mm Model
...
Wheel spacer for our Rosepetal alloy wheel, see C-21A1071 for more info.
Chrome wheel nut for all original Mamba and Revolution wheels except 13".
Overall length is 48mm
Sleeve length is 32mm
Sleeve diameter is 13.8mm
The washer is 2.3mm thick and outside diameter is 24mm
Replacement wheel 68mm centre cap for C-21A1982 deep dish Minilight wheels. Sold individually.
For the latest 10" Revolution wheels with a 61mm centre cap introduced on 2004
For the latest 12" Revolution whels with a 67mm centre cap introduced on 2004
Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.
Cover those ugly tire valve stems with alloy caps in your choice of colors; MTC3=silver, MTC4=gold MTC5=red, MTC6=blue.
Chrome wheel nut for 13" Revolution except RFX type wheel.
16.9mm Shank diameter
34.7mm Shank depth
3.7mm Washer thickness
The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome ...
Stainless steel sleeve nut with tapered washer.
5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.
The best reason for buying our wheels is that spare ...
Genuine revolution centre cap for RFX 12" wheel only with 55mm hole.
Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tire rub on the inside. Spacers are sold by the pair, and include longer (2.25") wheel ENJO1039 studs. Cars fitted with spacered ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.