WASHER FOR BRAKE SERVO NON RETURN VALVE
11D5070

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat

In stockIn stock
Washer for 17H2646ORIGINAL brake servo non return valve

($0.70) £0.70 exc vat

($0.84) £0.84 inc vat

In stockIn stock

Recommended usage 1 x 11D5070 to fit one mini.

People also bought products

Fibre washer to go under 12A1436 metal washer on the twin HS2 carb air cleaner. One required for HS4--sold singly order as required

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

This special shake proof washer should be replaced. Found on front hose.

Also used on 21A1524 hydrolastic pipe adaptor.

Fits top and bottom of the front damper and the lower rear damper to keep the bush from moving in the damper (shock absorber) eye sockets. 3/8"hole.

1.4mm thick by 24.6mm wide.

Large cup retaining washer for the front suspension tie rod.

Sold singly 1 required per rod and 2 per car

If you have a van/estate or early mini sender unit in your petrol tank it will be held in by 6 screws 53K165 and these are the special copper washers that go on them. The cork gasket is GUG705711GM

For all sliding window models this washer sits against the chrome boss 14A8151 that hold the window catches.

Universal fibre washer mainly used on inlet manifold blanking plugs ADP210.

Concave washer for the CLZ549 pin on the quadrant of dry suspension minis.

This is the correct thick flat washer for a suspension tie bar rod. The washer has a 7/16" hole is 1.5" wide. See 2A4328 for the correct dished washer.