CROSSMEMBER BRACKET TO BULKHEAD CLUBMAN L/H
14A6739

($35.00) £35.00 exc vat

($42.00) £42.00 inc vat

In stockIn stock
Bracket on the end of the dash crossmember(x member holds master cylinders) under bonnet right hand side. The x member is AHC36003

($35.00) £35.00 exc vat

($42.00) £42.00 inc vat

In stockIn stock

Recommended usage 1 x 14A6739 to fit one mini.
Clubman Body Panels - Qty 1

People also bought products
DOOR A POST PANEL R/H NON GENUINE
MSL43R

Front A panel part of door frame with door stay hole for internal hinge cars right hand non gen.

($30.23) £30.23 exc vat

($36.28) £36.28 inc vat
CROSSMEMBER BRACKET TO BULKHEAD CLUBMAN R/H
14A6738

Bracket on the end of the dash crossmember (x member holds master cylinders) under bonnet right hand side. The x member is AHC36003

($35.00) £35.00 exc vat

($42.00) £42.00 inc vat
HERITAGE CLUBMAN FRONT GRILL PANEL ASSEMBLY 76 ON
HMP441040

Really a built up half front end for the mini clubman, consists of a lower panel with headlamp panels,slam panel and stiffener between the front and slam panel. 76 ON--no inner or outer wings

($260.00) £260.00 exc vat

($312.00) £312.00 inc vat
CROSSMEMBER BRACKET TO BULKHEAD LH MK3 ON
AHP36007

Bracket on the end of the dash crossmember(x member holds master cylinders) under bonnet left hand side.For mini variants except Clubman. The x member is AHC36003For Clubman see 14A6739

For Mk1/2 see MSP005...

($35.00) £35.00 exc vat

($42.00) £42.00 inc vat
INNER WING CLUBMAN L/H INNER WING
CZH569

The full inner wing with wheel arch section for the mini clubman range --if you need only the first 20" approx of the inner wing see CZH3063.

($285.00) £285.00 exc vat

($342.00) £342.00 inc vat
PANEL REAR QUARTER WAISTRAIL N/S
CZH427

the left hand waist rail that is supplied on a new bodyside from us.

Acts as a stiffener on the inside of the bodyside between the rear seat pan and the B post just under the rear opening side window

($58.00) £58.00 exc vat

($69.60) £69.60 inc vat
PANEL REAR QUARTER PANEL WAISTRAIL O/S
CZH426

this r/h waist rail is alreday fitted to a new bodyside CZH430 .

It acts as a stifener on the inside of the bodyside just below the rear side window for strengthening between rear seat pan and B post

($58.00) £58.00 exc vat

($69.60) £69.60 inc vat
RADIATOR COWLING CLUBMAN BODY SHAPE
CZH570

The left side inner fender of the Mini Clubman should have a metal cowling to focus the air from the radiator to the wheel well. The almost sqaure cowling is spot welded to the inner fender. If you are resoting your car properly you will need to ha...

($50.00) £50.00 exc vat

($60.00) £60.00 inc vat
FRONT PANEL MINI CLUBMAN PRE 1976
CZH563

genuine front panel for the mini clubman before 1976 when the subframe was rubber mounted.see AAM1022 for rubber mounted type as fitted from 1976 on.

the front of these panels is the same but the subframe mounting bracket on the...

($145.00) £145.00 exc vat

($174.00) £174.00 inc vat
INNER WING R/H CLUBMAN ONLY
CZH414

Full length inner wing for the R/H on mini clubman.

($215.00) £215.00 exc vat

($258.00) £258.00 inc vat
BONNET LANDER PANEL CLUBMAN
MS149

The only bonnet landing panel available for the clubman shape body for a long time this part is perfect in every detail and was used on the heritage bodyshells.

A Genuine panel is now available from BL Heritage CZH149.

...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
WINDSCREEN CORNER PANEL L/H
MS6L

A non genuine panel made for repairing the corner of the windscreen panel which is prone to rust from water splashing up from underneath the front wheel arch.

Experience has shown its easier to fit the genuine panel HMP441001 al...

($16.88) £16.88 exc vat

($20.26) £20.26 inc vat
WINDSCREEN CORNER SUPPORT PANEL R/H
MS6XR

THIS NON GENUINE PANEL PROTECTS THE UNDERSIDE OF THE WINDSCREEN VALANCE UNDER THE FRONT WING SECTION RIGHT HAND. Also fitted on the inner wing panel 14A8346 & 14A8347.

($12.15) £12.15 exc vat

($14.58) £14.58 inc vat
FRONT FLOOR PAN L/H PRESHAPED
MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
GENUINE MINI CLUBMAN WING R/H
CZH408

Only this genuine wing is now available for the mini clubman but you will probably require the headlamp backing panel CZH120

($160.00) £160.00 exc vat

($192.00) £192.00 inc vat
GENUINE MINI CLUBMAN WING L/H
CZH409

Only this genuine wing is now available for the mini clubman but you will probably require the headlamp backing panel CZH121

($160.00) £160.00 exc vat

($192.00) £192.00 inc vat
REAR VALANCE CLOSING PANEL R/H
ALA5524

Right hand panel behind wheel arch with subframe mounting holes and splash guard panel to stop debris being thrown into rear valance-but is also available with rear valance closing panel as ALA5528 R/H and ALA8623 for L/H

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
WINDSCREEN CORNER SUPPORT PANEL L/H
MS6XL

This non genuine panel protects the underside of the windscreen valance under the left hand front wing section. Also fitted on the inner wing panel 14A8346 & 14A8347.

($12.15) £12.15 exc vat

($14.58) £14.58 inc vat
FRONT FLOOR PAN R/H PRESHAPED
MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
GUSSET CLOSING PANEL R/H
14A8348

THIS PANEL PROTECTS THE UNDERSIDE OF THE WINDSCREEN VALANCE UNDER THE FRONT WING SECTION also fitted on the inner wing panel 14A8346/7

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat