CLIP FOR CENTRE BINNACLE FINISHER (14 REQUIRED)
14A9796

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

In stockIn stock
These are the little 'whisker clips' that hold the 14A9907 bezel on the front of the oval 3-instrument gauge pod 24A2702. The 'ears' slot into the back of the bezel and the tails that stick out go thru one of 14 holes in the plastic pod and are folded over to hold the bezel in place.

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

In stockIn stock

Recommended usage 14 x 14A9796 to fit one mini.
Dash, switch panels & ashtrays - Qty 14

Kit products

Complete binnacle set for centre speedo cars, kit includes 130 mph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge c...

Complete binnacle set for centre speedo cars, kit includes 130 mph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gaug...

Complete binnacle set for centre speedo cars, kit includes 200 kph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge cl...

Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge...

Complete binnacle set for centre speedo cars, kit includes 200 kph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Supplied with 13H4445 digital speedo

Complete binnacle set for centre speedo cars, kit includes 130 mph electronic black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Se...

People also bought products

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.

This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...

These panels hold the door panels in place under tension inside the door aperture. It is not essential, but well worth replacing or renewing these in conjunction with new door panels. Sold in pairs.

Black door pocket liner for the R/H door which has sliding windows and external hinges

Black door pocket liner for the L/H door which has sliding windows and external hinges

Original type MK1/2 door strap in POWDER BLUE

Check straps matched seat colours or outer main seat colour on two tone types

ALE1221 Black

14E8403 Cumulus grey-light grey-darker than Dove Grey trim<...

One pair (saloon car set) of rear quarter door cards in black , 1976 - 1980

Clip under front floor fitted to 1990 for holding fuel/ brake lines (2 per car)

located beside floor pan footwell and tunnel

Clip for underside of front floor(3 per side) 6 in total fitted to 90

Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021

Mk1/2 1965 on cream crackle SV2017C

Mk3 196...

Cream colour crackle finish sun visor as fitted from december 1965 onwards. Will fit later cars if required. Drivers side without mirror.Check out the special clips to hold these visors as they are sold seperately in car sets only as SV2021<...

bracket for boot board R/H on 7.7 gallon tank and on both sides for 5.5 gallon tank when 165 tyres fitted

L/H BOOT BOARD BRACKET FOR 7.5 GALLON TANK AND 165 TYRES.

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...

Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow

number 1 with red ends is EEB100060

number 2 and 3 is white ends are both EEB100070

number 4 with black ends is EEB100080
...

This is the small plastic nut used to hold the fuel line protector shield on later cars, also used to hold the catalytic converter heat shield on, 4 required for each shield.