RAM STAX HS2 LONG
C-AHT246

($55.49) £55.49 exc vat

($66.59) £66.59 inc vat

Out of stockOut of stock
2.5" long ram pipe for 1.25" SU.


General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a con...

($55.49) £55.49 exc vat

($66.59) £66.59 inc vat

Out of stockOut of stock

Recommended products
CARB ELBOW BOLT 5/16" UNC
SY505071

5/16"unc cap head bolts 7/8"long for attaching the air cleaner alloy elbow to the carb on all HS2/4 and HIF.

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
GASKET 1.25" CARB ELBOW
12H862B

The gasket on the air cleaner elbow side of the carb. Bolts between the carb and elbow or directly to pancake filters on the HS2 carb only. See GUG705559GM for HS4 carbs

($0.25) £0.25 exc vat

($0.30) £0.30 inc vat
Alternative products
RAM STAX HS2 SHORT
C-AHT245

1.5" long ram pipe for 1.25" SU.


General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a co...

($55.49) £55.49 exc vat

($66.59) £66.59 inc vat
People also bought products
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

($19.60) £19.60 exc vat

($23.52) £23.52 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

($1.16) £1.16 exc vat

($1.39) £1.39 inc vat
ANCHOR TAG ON CARB
12A4

($0.66) £0.66 exc vat

($0.79) £0.79 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

($87.11) £87.11 exc vat

($104.53) £104.53 inc vat
PETROL PIPE BRAIDED 5/16" BORE X 2.5"
21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat
T PIECE 5/16"
MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
JET BEARING KIT HS4
WZX1442

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

($21.77) £21.77 exc vat

($26.12) £26.12 inc vat
CARB HS2 SERVICE KIT FOR SU CSK51
WZX1851

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

($55.31) £55.31 exc vat

($66.37) £66.37 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

($11.70) £11.70 exc vat

($14.04) £14.04 inc vat
MANIFOLD STUD FOR TWIN HS2 INLET
CHS2614

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

($1.83) £1.83 exc vat

($2.20) £2.20 inc vat
CARB HS2 FULL REBUILD KIT
CRK104

For HS2 single carbs this is the Complete kit of the parts required for an overhaul kit- if you do not require the spindle and disc and bushes see WZX1851

($73.50) £73.50 exc vat

($88.20) £88.20 inc vat
HEAT SHIELD BLACK KIT TWIN HS2
MSSK008

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

($26.47) £26.47 exc vat

($31.76) £31.76 inc vat
NEEDLE BDP
NZX8014

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed soli...

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat
HS2 CARB DASHPOT COVER - ALLOY
R22

Brighten up your engine bay with these bright alloy carb covers. These fit HS2 1.25" type carbs only- see R22BLUE and R22RED

($13.74) £13.74 exc vat

($16.49) £16.49 inc vat
HS2 CARB DASHPOT COVER - RED
R22RED

brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22BLUE and R22 for chrome look

($12.89) £12.89 exc vat

($15.47) £15.47 inc vat
FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)
WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($10.38) £10.38 exc vat

($12.46) £12.46 inc vat
HS2 JET BEARING KIT.FIXED
WZX1341

This kit for the HS2 type carb includes the fixed needle type bearing jet(sleeve)the adjusting nut,spring and locknut where you adjust your carbs.

.Quantity required for single carb-1 set or for twin carbs 2 sets required

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat
NEEDLE ABD SWINGING - STAGE 1 RICH
CUD1027

This needle is richer than used in our stage one kit but is useful when slightly different mods are carried out.

($8.25) £8.25 exc vat

($9.90) £9.90 inc vat