SPIN ON OIL FILTER CONVERSION KIT

A kit to convert the early style cartridge oil filter to the later style spin on filter.

($20.11) £20.11 exc vat

($24.13) £24.13 inc vat

VICTOR REINZ LARGE BORE HEAD GASKET

GUG702560VR

Victor Reinz large bore head gasket for A-series engines.

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat

RAMAIR SPI INDUCTION KIT

SR-037

($39.17) £39.17 exc vat

($47.00) £47.00 inc vat

RAMAIR FILTER HIF6/HIF44 1.75" AIR FILTER

RS2-247-401

Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body, is used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides ma...

($48.11) £48.11 exc vat

($57.73) £57.73 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat

VICTOR REINZ SMALL BORE HEAD GASKET

GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.

Gasket fitment. Writing side up.

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat

VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...

2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

AC DODD ROAD TORQUE CAMSHAFT

ACD-RT

AC Dodd Road Torque cam, great for low end power. Please see picture for full cam specs.

Road torque, this cam for strong low & mid range lugging, Touring, Smooth idle, excellent emmisions

ACD - RT

Power...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

ROCKER ADJUSTING NUT EN24T

C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat

11/16" DOWTY SEAL

DSM18

11/16" dowty seal for post 1991 cars where the original pipe has been replaced with a braided pipe or an oil cooler has been fitted using part number MOC4. used on the TCZ102

($2.40) £2.40 exc vat

($2.88) £2.88 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat