DISTRIBUTOR HOLE BLANKING PLUG A+
DIZZYPLUG02

($17.50) £17.50 exc vat

($21.00) £21.00 inc vat

In stockIn stock
Lightweight billet aluminium distributor hole blanking plug for A+ engines.

($17.50) £17.50 exc vat

($21.00) £21.00 inc vat

In stockIn stock

Recommended usage 1 x DIZZYPLUG02 to fit one mini.

People also bought products
DISTRIBUTOR HOLE BLANKING PLUG PRE A+
DIZZYPLUG01

Lightweight billet aluminium distributor hole blanking plug for pre A+ engines

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
DISTRIBUTOR 998 59D ELECTRONIC A PLUS
ADU5789MS

Electronic Distributor for any standard A+ 998cc. Negative earth only.



From 1982on 998cc were fitted with a ballast coil which means a new wire must be fitted from fusebox top left terminal where there is a large white cable to the...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat
CONTACT POINTS MINI+METRO POST 80 DUCELLIER DISTR...
GCS119

fitted to ducellier distributors only which are recognised by their red cap.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
MINISPARES OWN TWIN POINT IGNITION LEAD SET
GHT289MS

Set of 4 ignition leads from the original supplier to Unipart, suitable for all twin point minis 1997 onwards. For use with M4 type coil.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
COIL PACK FOR MPI - TWIN POINT 1996 ON
GCL204

Solid state ignition coil. M4 type for twin point injection minis.

Plugs on the current MPI coils are very snug but do fit.

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
ROTOR ARM FOR ELECTRONIC DIZZY 1990-96
GRA2143

Rotor arm for all A series electric distributors when points are not fitted, except for turbo. The distributor cap for this rotor arm is GDC156.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat
DISTRIBUTOR CAP ELECTRONIC IGNITION
GDC156

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is GRA2143. Fits all 1992 onwa...

($5.45) £5.45 exc vat

($6.54) £6.54 inc vat
CONTACT POINTS FOR 45D 1974-80(RED PLASTIC)
GCS2118

These points were fitted from 1974-80 when the distributors became a 45D type,

the distributor cap shape changed also to GDC136 and likewise rotor arm GRA2114 and condenser GSC2109.

($2.90) £2.90 exc vat

($3.48) £3.48 inc vat
COIL FOR ELECTRONIC IGNITION - '89 ON
GCL143

This is the standard non ballast coil as used on the late Mini with factory electronic ignition for use with 65D distributor.0.9ohms.



GCL143 was the Genuine Rover part fitted part on 1275cc from 1990.

0.9ohms

GCL2...

($20.69) £20.69 exc vat

($24.83) £24.83 inc vat
NGK SPARK PLUG RESISTOR TYPE FOR TWIN POINT BPR6E
BPR6EVG

The spark plug for twin point injection cars to give good ignitability requiring low voltage with resistors to offer protection of the engine management system car radios and telephones.

($2.40) £2.40 exc vat

($2.88) £2.88 inc vat
CONTACT POINTS 59D BLUE PLASTIC TYPE 1980-91
GCS2261

Blue in colour these points were used on the latest 59D type distributors from about 1980 on up to the introduction of electronic distributor with only rotor arm."Sliding" points for 59D4 distributors, keep a spare set!

($3.20) £3.20 exc vat

($3.84) £3.84 inc vat
GROMMET FOR WIRING LOOM through dash or bulkhead
3H1457

Main wiring grommet that fits in the front parcel shelf. ID 12.5mm fits 35mm hole.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
INTERIOR LAMP MK1 POINTED ENDS
14A9148

Interior lamp with a black on/off switch and pointed torpedo ends.

Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.

Also there was an alternative lamp with black switch and square ends 13H192 which w...

($28.00) £28.00 exc vat

($33.60) £33.60 inc vat
ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES
21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

($3.83) £3.83 exc vat

($4.60) £4.60 inc vat
VICTOR REINZ SMALL BORE HEAD GASKET
GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.



Gasket fitment. Writing side up.

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat
VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...
2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
OXYGEN SENSOR LAMBDA UNIT (SPi & MPi) BOSCH
MHK10004BOSCH

Genuine Bosch lambda sensor, fitted to both the twin and single point injection cars and fitted in the same exhaust manifold shared by both cars. Be warned the cheaper non branded sensors cause lots of issues hence we only sell the Bosch version.

($78.57) £78.57 exc vat

($94.28) £94.28 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
WATER PUMP 3 YEAR GUARANTEE MPI only
GWP188EVO

MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...

($19.50) £19.50 exc vat

($23.40) £23.40 inc vat