($0.91) £0.91 exc vat
($1.09) £1.09 inc vat
($0.91) £0.91 exc vat
($1.09) £1.09 inc vat
Recommended usage 1 x FS106107 to fit one mini.
Engine mount bolt kit for manual cars, 1 kit requried per car.
Alloy lightweight original looking radiator with correct shape header and lower tanks, same as ARP2000 to look at but made in alloy with latest technology cuprobraze manufacture. 6 Metric fixings screws required if you have old imperial ...
5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap
M5x12mm cap head bolt, in Chemical Black Finish, used in our MS73EVO adjustable rear brackets.
Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.
Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.
Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud
Mini Spares own exclusive designed Lightweight aluminium type high efficiency radiator with good fitment, rigidity and appearance, unlike others on the market with 4 large ugly fixing nuts on each side, or where the header tank is 10mm wider that fou...
2 per engine-Longer lasting poly type radiator grommet in Yellow for 1974 on.
These were first used on the one piece cowling from 1974 on. These fit on the lower retaining bolt and 2 are required but sold singly.
Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}
M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)
"4-Core" Radiator the only real "4-core" radiator available today is supplied by MiniSpares of London with a drain hole and plug- this hole also accepts the sender unit as used on later cars from 1991 which is available as C-ARA4446 kit....
Top and bottom rad cowling for the mini Cooper and S to 1971,
plus a few 1275GT to 1974.
The fixed bracket on the bottom cowl is moved further away from the engine towards the radiator. This also uses a bent rad bracket [link]12A293...
These stainless steel bolts are to replace A Plus bolts used on the heater tap but will fit all earlier models making removal easier. Supplied as a pair only.
Quantity required one kit per car.
Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.
Also the bolt to hold the starter motor.
Also the bolt for the [...
Standard Mini radiator with 3 offset tubes in the core. Metric thread fixings.
Flanged metric thread bolts are available as FS106107separately.
See also, alloy radiator in same shape but 2x18mm tubes as an alternative