DISTRIBUTOR SHIELD COVER ONLY

NJT10004

($21.17) £21.17 exc vat

($25.40) £25.40 inc vat

In stock

The current large plastic shield without any fittings or clips, to cover the engine electrics. Might need slight modifications for some SPI cars but we have fitted them on our own cars without any problems.

The plastic clips are available as...

($21.17) £21.17 exc vat

($25.40) £25.40 inc vat

In stock

Recommended usage 1 x NJT10004 to fit one mini.

Distributors - Qty 1

Coil, Vacuum Control Pipes, Ignition Cables & Shi - Qty 1

People also bought products

PERFORMANCE 8mm PLUG LEAD SET RED

C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat

VAC UNIT 45d/59d FOR 1275cc

37H8379MS

Fits our 45/59d distributors, 1275cc as fitted to 12G4180 and ADU3825

Along with our distributor manufacturer we have found this to be the best for modern day fuels for all 45 or 59d distributor for 1275cc uses as...

($6.60) £6.60 exc vat

($7.92) £7.92 inc vat

CONDENSER 45D/59D RESIN TYPE ORIGINAL

GSC110

original Lucas type RESIN BASED CONDENSER made for the 45/59D type distributor if you want a quality item rather than the cheaper inferior parts available. Filled with 3m of winding inside as per original Lucas but every copy analysed to date has ...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

COIL BRACKET 1969-95 LUCAS TYPE COILS

12G2994

Coil bracket fitted to end stud of cylinder head,clutch end for coil to mount on as fitted 1969-94-MK3 on. This has been made to the original specification with the welded lug nuts rather than the cheaper method of having just plain holes to take a b...

($8.48) £8.48 exc vat

($10.18) £10.18 inc vat

BRACKET DIZZY SHIELD TO TOP OF ROCKER COVER (SINGL...

NJU10002

Bracket for attaching the Distributor water shield to the rocker cover bolts.

Does not come with fixing clips, these are available seperately as part number 13H6461.

($6.14) £6.14 exc vat

($7.37) £7.37 inc vat

BRACKET FOR DIZZY SHIELD TO BLOCK (BOTTOM OF SHIEL...

JZV1073

Bracket for attaching the Distributor water shield block to gearbox stud/bolt

Does not come with fixing clips, these are available seperately as part number 13H6461

Upper bracket-NJU10002

Lower bracket- JZV1073

The...

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER

AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat

ROTOR ARM FOR 25D TYPE PERFORMANCE TYPE

GRA101

If you have an original 25D type distributor this is an upgraded arm (blade moulded and riveted )for performance use because all the other types available now are likely to fail at high revs. Because the blade is thin,or the rivet sometimes to long a...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

DISTRIBUTOR 123 ELECTRONIC IGNITION WITH VAC A+

C-27H7773

The all new 123 Electronic distributor is now available at Minispares. Featuring 16 pre programmed advanced curves built in, a must for any mini with a worn distributor. Full instructions are included with the system. For any A series, A Plus engines...

($277.50) £277.50 exc vat

($333.00) £333.00 inc vat

COIL FOR NON BALLAST / POINTS IGN UPTO 1983

GCL216

Original mini coil fitted to all cars up to 1983.

3ohms

NOT for ballast type ignition systems.

Our research, sales and feed back shows Intermotor coils to be the best available for the mini.

Original type coil bra...

($17.42) £17.42 exc vat

($20.90) £20.90 inc vat

SILICONE LUMENITION TWIN POINT LEAD SET (4 LEADS O...

BLS541

Quality HT lead set for twin point injection minis. For use with M4 type coil. Spiral bound wire giving instant greater resonance.

($48.75) £48.75 exc vat

($58.50) £58.50 inc vat

ROTOR ARM FOR ELECTRONIC DIZZY 1990-96

GRA2143

Rotor arm for all A series electric distributors when points are not fitted, except for turbo. The distributor cap for this rotor arm is GDC156.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

DISTRIBUTOR SPINDLE O RING SEAL

513682A

The O ring that actually sits on the distributor drive spindle shaft in the recess provided.

($0.48) £0.48 exc vat

($0.58) £0.58 inc vat

ROTOR ARM FOR 45D/59D SEE GRA2130 FOR RELIABILITY

GRA2114

Post '74 cars with points or electronic distributors use this rotor arm.

If you originally wanted an upgraded version, the Turbos used the blue type cap and points GDC143 and GRA2130 respectively to contend with ext...

($2.43) £2.43 exc vat

($2.92) £2.92 inc vat

DISTRIBUTOR CAP ELECTRONIC IGNITION

GDC156

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is GRA2143. Fits all 1992 onwa...

($5.45) £5.45 exc vat

($6.54) £6.54 inc vat

CONTACT POINTS FOR 45D 1974-80(RED PLASTIC)

GCS2118

These points were fitted from 1974-80 when the distributors became a 45D type,

the distributor cap shape changed also to GDC136 and likewise rotor arm GRA2114 and condenser GSC2109.

($2.90) £2.90 exc vat

($3.48) £3.48 inc vat

COIL FOR ELECTRONIC IGNITION - '89 ON

GCL143

This is the standard non ballast coil as used on the late Mini with factory electronic ignition for use with 65D distributor.0.9ohms.

GCL143 was the Genuine Rover part fitted part on 1275cc from 1990.

0.9ohms

GCL2...

($20.69) £20.69 exc vat

($24.83) £24.83 inc vat

VACUUM PIPE ELBOW

12B2062

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat

NGK SPARK PLUG RESISTOR TYPE FOR TUNED SINGLE POIN...