PISTON SINGLE 998 FLAT TOP PLUS 60
P22463-60

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

In stockIn stock
These have been specially manufactured for Minispares.

Sold individually with rings and pin complete

these are the preferred pistons of many racers in the 998 class

Ringsets are available as R43240-60

($40.00) £40.00 exc vat

($48.00) £48.00 inc vat

In stockIn stock

Recommended usage 4 x P22463-60 to fit one mini.

People also bought products
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
BIG ENDS +10 998/1098/970/1071/ COOPER "S" ACL RAC...
C-AEB572-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($66.27) £66.27 exc vat

($79.52) £79.52 inc vat
SINGLE PISTON RING SET FOR R43240-40
08-524311-10

($21.76) £21.76 exc vat

($26.11) £26.11 inc vat
BIG END SET 60 OVERSIZE 998/1100 COOPER S
AEB572-60

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a road motor.

( Tri-Metal )

Sintered copper lead, lea...

($29.70) £29.70 exc vat

($35.64) £35.64 inc vat
RIGID ENGINE TO GEARBOX HALF MOON SEAL U
CAM6548

Originally developed by Rover to cut down on warranty hourly costs on powertrain warranty repairs, by their main dealers.-Labour time allowed at Rover dealers for fitting this seal was 3.4 hours labour rate.

This is a special rigid seal and ...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
CAM LINER SET 1275
ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all 1275cc blocks plus 970 and 1071 Cooper S. It's almost too simple and thus often overlooked during a rebuild. Camshaft bearings are pressed...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
PISTON RINGSET 998cc +60 PRESSFIT
R43240-60

($81.60) £81.60 exc vat

($97.92) £97.92 inc vat
ENGINE TO GEARBOX NUT AND BOLT KIT
MSSK060

Complete nut, bolt and washer set for engine to gearbox only

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat
WATER PUMP FITTING KIT FOR GWP187 AND GWP188
GWP187FK

Water pump fitting kit for models without bypass facility, includes new bolts, washers and superseal gasket.

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
BIG ENDS PLUS 30 OVERSIZE 1275 EXCEPT COOPER S
AEB91306-30

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat
BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S
AEB572-40

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

($28.02) £28.02 exc vat

($33.62) £33.62 inc vat
BIG ENDS PLUS 30 OVERSIZE 998/1100 COOPER S
AEB572-30

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

($22.96) £22.96 exc vat

($27.55) £27.55 inc vat
WASHER FOR BLOCK DRAIN PLUG (53K2853)
6K638

Washer for the drain plug on the rear of the block (53K2853)

($0.53) £0.53 exc vat

($0.64) £0.64 inc vat
ORIGINAL TYPE CAM FOLLOWER FOR FAST ROAD USE
2A13EVO

Mini Spares cam follower with original convex bottom Radii as used by BMC/Rover and made by Clanceys but less the oil hole. Using Clancey drawings and to our design for better cam performance and lift we have made the push rod recess deeper for stabi...

($2.88) £2.88 exc vat

($3.46) £3.46 inc vat
PISTON SINGLE 1098cc MINI +0.060
P20397-60

This piston for 1098cc engines was designed with 4 rings. The top three compression rings are .0625" thick and the bottom oil ring is .1575" thick.

Pin height in this piston design is 2.2855", this results in a compression of 8.5:1 in most ...

($53.27) £53.27 exc vat

($63.92) £63.92 inc vat
OIL PRESSURE RELEASE VALVE COPPER WASHER
6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat
OIL 20W50 SEMI SYNTHETIC OIL - 5 Litre CTV
MILLERS002

ESPECIALLY FOR MINIS

This 20-50w semi synthetic oil is produced especially for minis where it needs to lubricate both engine and gearbox parts giving the neccessary coating and protection. Semi synthetic has a long life to 100c with maximum ...

($35.25) £35.25 exc vat

($42.30) £42.30 inc vat
BOLT OIL FILTER HEAD TO BLOCK
LYG10008

later cars used this bolt to hold on the spin on filter head to the block-earlier cars used the CHS2613 stud--both are interchangeable

3/8"unc 1"long

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat