MANIFOLD FREEFLOW STAINLESS STEEL version of C-STR...
C-STR816S

£257.62 exc vat

£309.14 inc vat

In stockIn stock
Maniflow's reproduction of the original Cooper header, but manufactured out of the same tubing as the STD bore LCB.





MADE FROM 409 GRADE STAINLESS.

£257.62 exc vat

£309.14 inc vat

In stockIn stock

Recommended usage 1 x C-STR816S to fit one mini.

People also bought products
MANIFOLD TO DOWNPIPE EXHAUST CLAMP
GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat
MANIFOLD CLAMP FLAT TYPE 48mm 1.875"
C-AHT121

For the medium bore Maniflow LCB Y piece or AN180V. 48mm ID

£4.50 exc vat

£5.40 inc vat
MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD
C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat
MANIFOLD NUT STAINLESS STEEL MULTIPOINT
GHF261S

Smarten up your engine bay with these stainless steel nuts which are not only stronger and resistant to rust but the multi point nut heads are easier for access. See also kit C-STR287.

£5.25 exc vat

£6.30 inc vat
WASHER FOR MANIFOLD THICK TYPE
12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

£0.34 exc vat

£0.41 inc vat
MANIFLOW LCB ADAPTOR FOR FREEFLOW MANIFOLD
L71

This short pipe fits on the end of our freeflow manifols C-STR816 to give the overall length of an LCB when you have an exhaust system to fit that was made explicitly for LCB fitment.Total length is 300mm ID is 44mm OD is 48mm.

£6.66 exc vat

£7.99 inc vat
MANIFOLD CLAMP 1.5/8" LCB (1.625") FLAT TYPE
C-AHT97

This popular size clamp fits the y piece where it joins the manifold on all our standard long centre branch exhaust manifolds. Sold singly.

£5.04 exc vat

£6.05 inc vat
MANIFOLD CLAMP 1.5" LCB TO ENGINE FLAT TYPE
C-AHT94

This is the clamp for the C-AEG365 manifold that clamps it to the engine for extra support.

£4.80 exc vat

£5.76 inc vat
MANIFOLD GASKET INLET / EXHAUST
AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

£0.96 exc vat

£1.15 inc vat
THERMO-TECH EXHAUST WRAP
GS5630

1 inch X 50 feet / 25mm x 15metres

For Race Use only!

£43.50 exc vat

£52.20 inc vat
LINK PIPE TO REPLACE CATALYTIC CONVERTER
C-ARA664

If you wish to delete the catalyst (legal restrictions apply, so check to see if you are allowed) this pipe is specially made to replace it.

£32.99 exc vat

£39.59 inc vat
STAINLESS STEEL LCB MANIFOLD - C-AEG365 (SSLM004)
C-AEG365S

Stainless steel Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s, and for street 1380s. And in stainless steel for long life!


There is NOT enough clearance room when fitti...

£221.27 exc vat

£265.52 inc vat
MANIFOLD NUT/WASHER. 1990 on
LYH10008

The newest development in the A-series engine is the use of these nuts with swedged-on washers. The washer will not separate from the nut, so you won't lose it. Yet the nut rotates independently while you tighten it. What a great idea.

£3.68 exc vat

£4.42 inc vat
MANIFOLD NUT SHORT BRASS 5/16" UNF
GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat
ALLOY WATER HEATED TORQUEMASTER INLET MANIFOLD HS4...
C-AHT770

Genuine mini Spares inlet manifold dyno tested and designed for our Stage one kit C-STN17. The single SU manifolds is developed to give maximum airflow and gas speed, yet fit all engines even if the standard air cleaner set-up is used. I...

£32.00 exc vat

£38.40 inc vat
POLYURETHANE REAR COTTON REEL EXHAUST MOUNT
GEX7251POLY

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required. This is a stronger poly version.

£2.70 exc vat

£3.24 inc vat
MANIFLOW CENTRE EXIT SINGLE BOX 1.75" BORE EXHAUST...
C-ARA332SB

1.75" bore single box, centre exit exhaust system. This exhaust system by Maniflow is straighter and louder than our RC40 system. Very high quality with a skid plate on the bottom of the silencer and a polished stainless tip. Suitable for use with an...

£90.63 exc vat

£108.76 inc vat
MANIFLOW SIDE EXIT 1.75" SINGLE BOX EXHAUST SYSTEM
C-ARA331SB

Standard larger 1.750" bore single box exhaust system for saloons.

see C-ARA339 for van and pickups.

£90.63 exc vat

£108.76 inc vat
EXHAUST TAILPIPE TRIM FOR VAN/ESTATE fits 45mm ID
RC40-005

Stainless steel tailpipe trim with hanger bracket designed for fitting to the tailpipe of RC40 rear box as an extension piece. This is part of our RC40PACKAGE015 kit for Van/Estate and Pickup exhaust system when a freeflow o...

£25.44 exc vat

£30.53 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

£1.22 exc vat

£1.46 inc vat