DASH RAIL UPPER METAL PANEL WITH ASHTRAY APERTURE

This panel has mounting holes for later models facia crash panel. These holes will require blanking for true originality on earlier models without the facia pad

£49.00 exc vat

£58.80 inc vat

GUSSET CLOSING PANEL R/H

14A8348

THIS PANEL PROTECTS THE UNDERSIDE OF THE WINDSCREEN VALANCE UNDER THE FRONT WING SECTION also fitted on the inner wing panel 14A8346/7

£14.00 exc vat

£16.80 inc vat

FRONT PANEL VAN AND PICKUP 1976 on

AAM1106

Non Genuine for the Pick-up and Van with a slat type fixed grille as a trademark for Mini commercial type vehicles originality.

This good reproduction is the only panel available to allow you to restore it easily.It is a modified saloon pan...

£187.50 exc vat

£225.00 inc vat

INNER HINGE REPAIR PANEL R/H

MSL41R

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section

£12.90 exc vat

£15.48 inc vat

HEADLAMP BOWL METAL

MS14

If your rusted old headlight bucket is getting to you, don't waste time trying to salvage it when new metal reproduction metal buckets are AVAILABLE.

With a headlamp rim fixing bracket 37H7421 attached

Whether you are ...

£20.40 exc vat

£24.48 inc vat

INNER HINGE REPAIR PANEL L/H

MSL41L

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section of inner wing

£12.90 exc vat

£15.48 inc vat

FRONT FLOOR PAN R/H PRESHAPED

MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

£33.00 exc vat

£39.60 inc vat

MINI FRONT PANEL PRE 1976

MS4E

This early front (nose) panel will fit any Mini manufactured before 1976. It is probably easier to replace the entire panel than to repair a damaged one, especially if it's been hit more than once! Later Minis with rubber mounted subframes, use panel...

£89.93 exc vat

£107.92 inc vat

WING INNER WITH HOLE +A PANEL LEFT HAND MK3 TYPE 1...

ABD36005

Inner front L/H wing with the A panel and door stiffener check strap panel attached for ease of fitment and alignment.This has the large round hole for the fan as fitted from 1991on

£239.00 exc vat

£286.80 inc vat

FRONT FLOOR PAN L/H PRESHAPED

MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

£33.00 exc vat

£39.60 inc vat

WINDSCREEN CORNER PANEL L/H

MS6L

A non genuine panel made for repairing the corner of the windscreen panel which is prone to rust from water splashing up from underneath the front wheel arch.

Experience has shown its easier to fit the genuine panel HMP441001 al...

£16.88 exc vat

£20.26 inc vat

FLOOR PAN L/H FRONT 1991 on

MSL25L

Aftermarket version of the L/H floorpan for 1991 on cars.

This floor was made stronger with smaller heel pad area to prevent vibration and rust and will fit any Rod change gear shift mini but was introduced on the first injection cars in 199...

£34.50 exc vat

£41.40 inc vat

BONNET LANDER PANEL CLUBMAN

MS149

The only bonnet landing panel available for the clubman shape body for a long time this part is perfect in every detail and was used on the heritage bodyshells.

A Genuine panel is now available from BL Heritage CZH149.

...

£26.25 exc vat

£31.50 inc vat

FRONT PANEL MINI CLUBMAN PRE 1976

CZH563

genuine front panel for the mini clubman before 1976 when the subframe was rubber mounted.see AAM1022 for rubber mounted type as fitted from 1976 on.

the front of these panels is the same but the subframe mounting bracket on the...

£125.00 exc vat

£150.00 inc vat

FLOOR EXTENSION PANEL FOR MINI VAN/ESTATES ETC

14A9023

Commercial Mini floor extension

It is an essential part for the correct restoration of all the longer wheelbase mini derivatives. From the original tooling.

£95.00 exc vat

£114.00 inc vat

INNER WING CLUBMAN L/H INNER WING

CZH569

The full inner wing with wheel arch section for the mini clubman range --if you need only the first 20" approx of the inner wing see CZH3063.

£275.00 exc vat

£330.00 inc vat

FIBREGLASS FRONT END NO BONNET

MS101

Curley Mouldings fibreglass front end, as used on Mini7 and Miglia race cars. Will need trimming for a perfect fit.

£157.50 exc vat

£189.00 inc vat

CARBON FIBRE FRONT END ONLY

MS102

Curley Mouldings carbon fibre front end, as used on Mini7 and Miglia race cars. Will need trimming for a perfect fit. Bonnet not included.

£240.00 exc vat

£288.00 inc vat

INNER WING AND FLITCH PANEL Mk1/2 R/H

14A7900

For vehicles with external hinges and sliding type windows this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to. This is the right hand panel made by Heritage but not 100% perfe...

£149.00 exc vat

£178.80 inc vat

INNER WING AND FLITCH PANEL Mk1/2 L/H

14A7901

For vehicles with external hinges and sliding type windows this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to.This is the left hand pane wing with radiator vent slats but not ...

£195.00 exc vat

£234.00 inc vat