Showing 81 to 97 of 97

One male and one female end on a copper easy bend brake pipe 106" long

You'd think that the way Minis leak oil they'd never rust on the underside, but they do! If your Mini is rusty below it is a good idea to check your metal brake lines; rust on them could be disasterous.This complete kit is available, in non-corroding...

Single line L/H/D - dry suspension - no servo fitted. If you have drum brakes and a servo you should use GL4992 plus 2 of HF10.

These kits or pipes are approx 35% off retail.

Split diagonal saloon without 4 way valve, fits L/H/D and R/H/D.

Van and Estate version is GB5007.



You'd think that the way Minis leak oil they'd never rust on the underside, but they do! If your Mini is rusty below it is ...

As the original brake pipe kit is now obsolete, we now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

Brake pipe with male metric ends, 12mm for master cylinder and 10mm for PDWA valve

Brake pipe with male metric ends, 12mm for master cylinder and 10mm for PDWA valve. fits in the bottom union and goes to left hand union in valve (to go to rear brakes)

We now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.

These pipes are retail...

Set of 6 hoses, 4 front and 2 rear to fit the ERA turbo.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided st...

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

Diagonal split van/estate only 1976-80-see GB5014 for saloon kits which now have imperial connectors and all imperial pipe unions.

You'd think that the way Minis leak oil they'd never rust on the underside, but they do! If your ...

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, RH side.

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, LH side.

2 3 4 5