MANIFLOW DOWNPIPES WHEN HIF CARB FITTED

Downpipe to fit the original exhaust manifold on the late (from 1990) Mini Cooper and MG Metros when using HIF6/44 carburettors. Y piece outlet end is 1.875" outside diameter, 1.75" inside diameter.Without sensor hole

This allows you to dele...

£69.54 exc vat

£83.45 inc vat

INJECTION LCB MANIFOLD WHEN DELETING CAT

C-AEG374

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FUEL INJECTED CARS WITH A SENSOR TAKE OFF in main LCB body, THIS IS FOR USE WHEN THE CATALYST IS BEING REMOVED AND A RC40 EXHAUST IS BEING FITTED. If the catalyst is to be retained use [link]C-AEG3...

£99.91 exc vat

£119.89 inc vat

EXHAUST.METRO TURBO SINGLE BOX CUSTOMER ORDER ONL...

ET1

Single box performance system for the Metro Turbo 2"

£202.50 exc vat

£243.00 inc vat

MANIFOLD STD BORE EXHAUST LONG CENTRE BRANCH (LCB)...

C-AEG365

Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s and for street 1380s.

There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using [lin...

£86.66 exc vat

£103.99 inc vat

MANIFOLD CLAMP FLAT TYPE 48mm 1.875"

C-AHT121

For the medium bore Maniflow LCB Y piece or AN180V. 48mm ID

£4.50 exc vat

£5.40 inc vat

LARGE BORE LCB MANIFOLD LM5

C-AHT289

Large bore LCB for competition use or on very large bore street engines; such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.

The best quality production exhaust manifold available from Minispares. The Long Center Branch...

£221.27 exc vat

£265.52 inc vat

MANIFOLD TO DOWNPIPE EXHAUST CLAMP

GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat

MANIFOLD GASKET FOR FUEL INJECTED CARS

GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.

...

£5.10 exc vat

£6.12 inc vat

MANIFOLD 3 INTO 1 STD BORE-LM7

C-STR332

Standard bore Maniflow 3-1 header.

£257.42 exc vat

£308.90 inc vat

MANIFOLD LCB SMALL BORE EXHAUST (LM2)

C-STR817

Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

£117.72 exc vat

£141.26 inc vat

MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES

C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat

EXHAUST RC40 AND FITTING KIT PLUS EXHAUST MANIFOLD

RC40PACKAGE002

The famous RC40 mild steel exhaust and downpipe with a maniflow LCB plus the fitting kit for the exhaust system. There is NOT enough clearance room when fitting to old cars with rubber couplings which foul. Using QL5000 type...

£159.98 exc vat

£191.98 inc vat

MANIFOLD STD BORE MILLENNIUM LCB FOR INJECTION CAR...

C-AEG363

Injection models-Standard bore Budget priced LCB (1-3/4"id).

With pre cast flanges to improve flow and save engine tuners time matching the ports. This is for injection type cars only because it has a sensor hole. The Long Centre Branch des...

£60.00 exc vat

£72.00 inc vat

MANIFOLD LCB EXHAUST STAGE 2 WITH SPECIAL CENTRE B...

C-AEG376

Standard bore road LCB (1-3/4"id) that has an enlarged and reshaped middle pipe which creates a type of vortex, simulating a pulsing effect similar to the outside two pipes,thus producing an improved BHP,Torque and power curve.Ideal for very hot smal...

£118.54 exc vat

£142.25 inc vat

MANIFOLD LCB EXHAUST STAGE 2 WITH SPECIAL CENTRE B...

C-AEG376S

Stainless steel version of C-AEG376. Standard bore road LCB (1-3/4"id) that has an enlarged and reshaped middle pipe which creates a type of vortex,simulating a pulsing effect similar to the outside two pipes,thus producing an improved B...

£285.60 exc vat

£342.72 inc vat

MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...

C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat

Y PIECE FOR SMALL BORE LCB to customer order only

C-AHT194

"Y" Piece for small bore Maniflow LCB C-STR817

£49.50 exc vat

£59.40 inc vat

MANIFOLD STAGE 3 LARGE BORE LCB

C-AHT291

Large bore stage 3 LCB pipe for competition use only. Only suitable for large bore race engines such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.

The best quality production exhaust manifold available from Minispares....

£554.40 exc vat

£665.28 inc vat

MANIFOLD STAGE 2 LARGE BORE LCB

C-AHT290

Large bore stage 2 LCB with special centre pipe for competition use or on very large bore street engines; such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.

The best quality production exhaust manifold available from M...

£439.50 exc vat

£527.40 inc vat

8 PORT LARGE BORE EXHAUST MANIFOLD

C-AHT344RACE

8 port large bore exhaust manifold to compliment our race 8 port head

£496.50 exc vat

£595.80 inc vat