MANIFOLD NUT SHORT BRASS 5/16" UNF

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat

MANIFOLD INLET HS4 1.5 BORE SIZE L149

C-AEG490

The Maniflow steel intake manifold has established the standard by which all others measure themselves. This manifold is specially designed to maximize air flow within the space requirements of a Mini. It accepts either twin 1 1/2" or twin 1 3/4" ...

£178.29 exc vat

£213.95 inc vat

MANIFOLD Y PIECE stainless Steel for C-AEG365S

C-AHT197S

"Y" Piece for LCB Manifold C-AEG365 stainless steel

MADE FROM 409 GRADE STAINLESS.

£91.67 exc vat

£110.00 inc vat

MANIFOLD LCB CARB WITH CAT+LINK PIPE

C-AEG368

Basically the C-AEG373 LCB exhaust manifold but with a link pipe for retaining the catalyst on carb models after 1990-92.

£154.56 exc vat

£185.47 inc vat

MANIFOLD Y PIECE FOR STD BORE LCB WITH TEST PIPE T...

C-AHT195

"Y" Piece for Maniflow LCB C-AEG375 with test pipe sensor take off (not lambda).

£52.50 exc vat

£63.00 inc vat

MANIFOLD Y PIECE FOR C-AEG365 LCB L61

C-AHT197

"Y" Piece for LCB Manifold LCB C-AEG365

Comes with clamps to manifold

£38.43 exc vat

£46.12 inc vat

TWIN HS2 INLET MANIFOLD

C-AEG488

Cast alloy type,this intake manifold for twin 1.25"SUs (H2 or H4 -- NOT HS4)

It has been carefully produced to minimize cross-port-flow interference caused by the balance tube and has generous radii in all the right places. Further blending ...

£60.00 exc vat

£72.00 inc vat

CARB RUBBER GASKET (ARDEN 8 PORT)

C-AHT531

fit amal carburettor on 8 port cylinder head

£9.00 exc vat

£10.80 inc vat

MANIFOLD STUD 6MM LONGER THAN 53K487 APPROX 1990 O...

LYR10028

Manifold stud for all A series injection engines and some late carburettor cars which is 45mm long-6mm longer than 53K487.carburettor engines usually retained the 53K487 shorter screw for the outside 2 holes.

Sold singly,6 per c...

£0.75 exc vat

£0.90 inc vat

MANIFOLD LCB NEW CARB COOPER WHEN DELETING CATALYS...

C-AEG373

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FITTING CARBURETTOR POST 91 VERSION CARS WHEN REMOVING THE CATALYST AND FITTING RC40 EXHAUST.

Take off in "Y" piece. If the catalyst is to be retained use C-AEG368 which inclu...

£99.06 exc vat

£118.87 inc vat

MANIFOLD DOWNPIPES ONLY FOR INJ WHEN DELETING CAT

C-AEG372

Downpipes to fit onto the original exhaust manifold when deleting the catalyst on fuel injected minis and fitting an RC40 complete system.

£83.39 exc vat

£100.07 inc vat

MANIFOLD INLET 1.75" BORE SIZE HS4/6 L149A

C-AEG491

The Maniflow steel intake manifold has established the standard by which all others measure themselves. This manifold is specially designed to maximize air flow within the space requirements of a Mini. It accepts either twin 1 1/2" or twin 1 3/4" ...

£189.66 exc vat

£227.59 inc vat

MANIFOLD LARGE BORE Y PIECE FOR C-AHT289 L62

C-AHT198

"Y" piece for large bore LCB C-AHT289

£94.19 exc vat

£113.03 inc vat

MANIFOLD TWIN INLET HS4/6

C-AEG489

Cast alloy type, Fits either twin HS4 or HS6.(requires modifacation to fit HS6.2 extra studs per carb)

This intake manifold for twin SUs has been carefully produced to minimize cross-port-flow interference caused by t...

£73.60 exc vat

£88.32 inc vat

AIR CONTROL VALVE ON INLET MANIFOLD 1996on MPI SEE...

MLZ100090

Also known as stepping motor--idle air control valve (IACV)

Bolts on the side of the injection body housing to control engine idle speed

and air flow from cold start up.The blue socket loom cap fits this unit

THIS IS A MOD...

£63.00 exc vat

£75.60 inc vat

MANIFOLD NUT/WASHER. 1990 on

LYH10008

The newest development in the A-series engine is the use of these nuts with swedged-on washers. The washer will not separate from the nut, so you won't lose it. Yet the nut rotates independently while you tighten it. What a great idea.

£3.68 exc vat

£4.42 inc vat

MANIFOLD METRO LCB LMO22

C-AEG366

With half washers on back of flanges for the extra width of the original CAM6618 MG metro inlet manifold. Similar to C-AEG365 but 0.375" shorter to fit in the metro mini engine bay also, but also ideal for small bore engines...

£100.05 exc vat

£120.06 inc vat

DOWNPIPES AND LINK PIPE FOR INJECTION CARS

C-AEG371

Downpipes to fit onto the original exhaust manifold when retaining the catalyst on fuel injected late Coopers. Manual cars only

£121.70 exc vat

£146.04 inc vat

INJECTION MANIFOLD DOWNPIPE STUD

TD108051A

Special length and thread pattern only for the exhaust manifold to downpipe of injection cars, see also FX108047 special nuts. Metric M8.

£2.56 exc vat

£3.07 inc vat

MANIFOLD LINK PIPE WITH KNUCKLE FROM LCB TO CATALY...

C-AEG375

Link pipe for fitting between the LCB and the catalyst. It has a stainless steel knuckle joint to prolong life and give the flexibility required on the system to overcome damage. See also alternative RC40-016

Y piece replacemen...

£45.83 exc vat

£55.00 inc vat