OIL PRESSURE RELIEF VALVE STANDARD SPRING

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat

OIL PRESSURE RELEASE VALVE COPPER WASHER

6K431

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($0.36) £0.36 exc vat

($0.43) £0.43 inc vat

OIL PRESSSURE VALVE AND SPRING

6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat

OIL PRESSURE RELEASE BALL AND SPRING

AEA536KIT

Oil pressure relief valve ball and spring kit. Cooper S upto 1971. Can be retro fitted to all minis to boost oil pressure.

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat

OIL PRESSSURE VALVE AND SPRING

6K853KIT

The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat

GEARBOX TO BLOCK LOCATING DOWEL (HOLLOW)

12H1824

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat

SPIN ON OIL FILTER CONVERSION KIT

TAM2097FK

A kit to convert the early style cartridge oil filter to the later style spin on filter.

($20.11) £20.11 exc vat

($24.13) £24.13 inc vat

VICTOR REINZ SMALL BORE HEAD GASKET

GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.

Gasket fitment. Writing side up.

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat

VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...

2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat

AC DODD ROAD TORQUE CAMSHAFT

ACD-RT

AC Dodd Road Torque cam, great for low end power. Please see picture for full cam specs.

Road torque, this cam for strong low & mid range lugging, Touring, Smooth idle, excellent emmisions

ACD - RT

Power...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

11/16" DOWTY SEAL

DSM18

11/16" dowty seal for post 1991 cars where the original pipe has been replaced with a braided pipe or an oil cooler has been fitted using part number MOC4. used on the TCZ102

($2.40) £2.40 exc vat

($2.88) £2.88 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

PISTON RINGS FOR EVOLUTION +40 PISTON

C-STN102-40

Race quality Single piston ring pack for Mini Spares Evolution Pistons which also fits Mega and Omega pistons. This uses 3 piece oil ring 4mm and 2 of 1.2mm compression ring.

Sold per piston so 4 packs required per engine.

($16.00) £16.00 exc vat

($19.20) £19.20 inc vat

LOWER POLY STABILISER BUSH KIT

C-STR633

Stabiliser bush kit for lower engine steady

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

ARP 11 STUD HEAD SET

C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

MAINS +10 1275CC A PLUS ONLY ACL RACE

C-AEM91886-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat