CHECK STRAP SCREW MK1. MK2 AND VAN/PICKUP ETC

Screw for either end of the material check strap on MK1/2/van/pickup minis with external hinges. The head of this screw is chromed for a superior finish.

($1.49) £1.49 exc vat

($1.79) £1.79 inc vat

CHECK STRAP RETAINER PLATE MK1/2

14A764

This plate has recessed holes in for the check strap screws.

2 per door are required and these are only for cars with external hinges that had the material check strap as per MK1/2 and vans.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

CHECK STRAP BRACKET

14A6745

The larger check strap bracket on the body that has a curved section. Shown as black in the picture. One per door required.

($2.70) £2.70 exc vat

($3.24) £3.24 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

MK1 DOOR STRIKER AND GUIDE KIT

MSSK066

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat

RIVET CLIP UPPER DOOR MOULDING (BOTTOM)

13H744

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DOOR STRIKER PLATES STAINLESS STEEL PAIR

CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

($11.63) £11.63 exc vat

($13.96) £13.96 inc vat

DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL

ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat

DOOR HINGE FITTING KIT COMPLETE MK3 ON

MSSK017FK

MK3 door hinge fitting kit for all internal hinged doors. (hinges not included)

($18.09) £18.09 exc vat

($21.71) £21.71 inc vat

MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL

ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

($1.76) £1.76 exc vat

($2.11) £2.11 inc vat

DOOR PLATE BUFFER SCREW ( SHORT )

CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat

DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2

24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat

FIXING KIT FOR ALLOY EXTERNAL DOOR HINGES

14A6818BOLT

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

DOOR SEAL UPPER R/H TWIN POINT CARS 1996on

CFB101120

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim. fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat

DOOR SEAL LOWER L/H TWIN POINT CARS 1996on

CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

DOOR SEAL LOWER R/H TWIN POINT CARS 1996on

CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat

DOOR HINGE KIT SALOON MK3 SET NON GENUINE

MSSK017B

4 Non Genuine door hinges as a car set for wind up window type doors from 1970 on. These are a top quality item as opposed to the cheaper junk version available on the market.

Sold seperately as

top right CZH202MS 1 r...

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat

DOOR HINGE LOWER FOR BOTH SIDES MK3 ON

CZH212MS

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat

DOOR HINGE L/H UPPER MK3

CZH203MS

upper door hinge l/h for wind up window type door with internal hinge 1970on

this is not a genuine part and is available in a car set kit MSSK017B

See CZH203 for genuine

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat

DOOR HINGE R/H UPPER MK3

CZH202MS

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat

DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...

MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

($56.28) £56.28 exc vat

($67.54) £67.54 inc vat