PETROL PIPE BRAIDED 5/16" BORE X 2.5"

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat

RIGHT-HAND PETROL TANK FITTING KIT

MS82

Want to add a right-hand tank to your one-tank Mini? This kit includes everything, except the tank, to do it. Included are retaining straps, support brackets that mount to the rear seat back and boot floor, between tank metal fuel line and braided fu...

($73.17) £73.17 exc vat

($87.80) £87.80 inc vat

RIGHT-HAND PETROL TANK FITTING KIT

MS82

Want to add a right-hand tank to your one-tank Mini? This kit includes everything, except the tank, to do it. Included are retaining straps, support brackets that mount to the rear seat back and boot floor, between tank metal fuel line and braided fu...

($73.17) £73.17 exc vat

($87.80) £87.80 inc vat

PETROL TANK STRAP RETAINING BOLT

13H7583

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

($0.59) £0.59 exc vat

($0.71) £0.71 inc vat

CAPTIVE NUT FOR FUEL TANK STRAP BRACKET 1976-ON

346071A

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

($0.69) £0.69 exc vat

($0.83) £0.83 inc vat

PETROL TANK FOR SPI CARS ONLY-NON GENUINE

WFE10401MS

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however.

($192.00) £192.00 exc vat

($230.40) £230.40 inc vat

GENUINE MINISPARES FUEL FILLER NECK GROMMET

14A7057GENUINE

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

($7.24) £7.24 exc vat

($8.69) £8.69 inc vat

SPRING HOSE CLIP FOR FUEL/RADIATOR HOSE

UKC3803

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

($0.95) £0.95 exc vat

($1.14) £1.14 inc vat

BRACKET LEFT HAND PETROL TANK SUPPORT

14A6867

Support for L/H petrol tank.

($16.00) £16.00 exc vat

($19.20) £19.20 inc vat

PETROL HOSE 8MM (5/16") INJECTION RATED SOLD IN 1M...

LPH631

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

($6.35) £6.35 exc vat

($7.62) £7.62 inc vat

PETROL TANK 5.5 GALLON (LEFT HAND)

ARA359

5.5 gallon left hand tank with twist in sender unit.

For all mini saloons from 1964 until 1980 except Elf and Hornet. Also except the 1275GT from 1974 which used the later 7.5 gallon tank which became standard fitment to all mini saloons fro...

($298.99) £298.99 exc vat

($358.79) £358.79 inc vat

PETROL TANK SUPPORT BRACKET R/H

21A1330

Support bracket for the R/H, genuine Heritage part, can also use our own bracket 21A1329.

($18.00) £18.00 exc vat

($21.60) £21.60 inc vat

MONZA CHROME PETROL CAP WITH COLLAR

SP228

This is a copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monz...

($16.50) £16.50 exc vat

($19.80) £19.80 inc vat

VENT PIPE PETROL TANK

CRC7575

Vent pipe from petrol tank

late cars were only 765mm or 31" approx, but Mk1 cars were 54"

($2.93) £2.93 exc vat

($3.52) £3.52 inc vat

PETROL PIPE BRAIDED 5/16" BORE X 2.5"

21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat

PETROL CAP ALLOY ASTON STYLE 3" PETROL CAP

MSA1145

Designed to look expensive this 60s look cap fits over the genuine Rover locking cap WLD100660 held on by grub screws. Polished alloy finish similar to the Aston or john Cooper cap it is ultra easy to install and looks fantastic. Flip to...

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat

T PIECE 5/16"

MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat

PETROL TANK RETAINER RING FOR SENDER UNIT SEAL

ARA1501

Saloon petrol tank retainer clip for the rubber seal on the sender unit which is ARA1502 .Early tanks had 6 screws holding the sender unit in place and used gasket GUG705711GM

($1.35) £1.35 exc vat

($1.62) £1.62 inc vat

22" BRAIDED PETROL PIPE 1/4" BORE

PPK7

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...

($7.30) £7.30 exc vat

($8.76) £8.76 inc vat

12" BRAIDED PETROL PIPE 1/4" BORE

PPK5

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

($4.15) £4.15 exc vat

($4.98) £4.98 inc vat

PETROL PIPE HOSE 1 METRE

PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

($3.27) £3.27 exc vat

($3.92) £3.92 inc vat

15" BRAIDED PETROL PIPE 1/4" BORE

PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

($4.24) £4.24 exc vat

($5.09) £5.09 inc vat

PETROL TANK NECK SEALING RING

2A2069

Sponge like cushioning seal for all minis between the tank neck and the body plus the minivan/estat/pickup petrol tank where it goes between and tank and the the floor/shroud.

($1.30) £1.30 exc vat

($1.56) £1.56 inc vat