MECHANICAL FUEL PUMP GASKET

Paper gasket for either side of the spacer on all mechanical fuel pumps fitted on the rear of engines. The spacer with gaskets fitted is available as GUG705603GM.

($0.52) £0.52 exc vat

($0.62) £0.62 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat

PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...

AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.

this fits engines using the early egg shaped cover

This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

($24.75) £24.75 exc vat

($29.70) £29.70 inc vat

CRANK POSITION SENSOR AND BRACKET

C-AEG457

Crank sensor and bracket kit for our management pulley C-AEG456.

($69.60) £69.60 exc vat

($83.52) £83.52 inc vat

CRANKSHAFT DAMPER AND TRIGGER WHEEL PULLEY KIT

C-AEG456

36-1 crank trigger pulley and damper kit for use with aftermarket engine management systems.

($186.00) £186.00 exc vat

($223.20) £223.20 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

PISTON RING SET 998/1100 STD

C1072-00

Steel ring set,for 4 ring pistons. 3 compression rings @ 0.0625" oil rings 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

($35.20) £35.20 exc vat

($42.24) £42.24 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

REPLACEMENT SEAL O-RING FOR MSA1134. MSA1124/5 DIP...

TRS1316

Replacement O ring for the Minispares range of chrome dipticks

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

CRANK THRUST WASHER SET +0.30" 1275

ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

MAINS +10 1275CC A PLUS ONLY ACL RACE

C-AEM91886-10

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat

MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275 ACL RA...

C-AEM91120-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($71.78) £71.78 exc vat

($86.14) £86.14 inc vat