HIF44 CARB SPACER - 3/8"/9.5mm
GUG705964GM

($9.90) £9.90 exc vat

($11.88) £11.88 inc vat

In stockIn stock
Spacer suitable for HIF44/38 carbs, 9.5mm thick and supplied without gaskets.

picture shoen is only to illustrate use of gaskets GUG705561GM.

($9.90) £9.90 exc vat

($11.88) £11.88 inc vat

In stockIn stock

Recommended usage 1 x GUG705964GM to fit one mini.
Emission, Carburettor Fittings and engine controls - Qty 1
Carburettor Fixings, Throttle Pedal & Abutment Br - Qty 1

Recommended products
CARB TO MANIFOLD GASKET 1.75" (HS6 and all HIF)
88G429B

Mini Spares own performance upgrsded paper gasket that sits either side of the carb to manifold spacer on HIF38/44 type 1.75" carbs.Sold singly, order quantity as required to suit your car.

($0.42) £0.42 exc vat

($0.50) £0.50 inc vat
Alternative products
CARB SPACER HIF44 (0.56"thick) 14.46mm
GUG705602GM

Spacer with gaskets fitted for any 4 bolt fitting carb such as HS6 HIF range about 9/16" (14.5mm). As this is the only thick spacer you need to check stud length.

($10.00) £10.00 exc vat

($12.00) £12.00 inc vat
MANIFOLD ADAPTOR 1.75" (6.3mm) THICK WITH VACUUM T...
MFA446

Carb to manifold spacer with facility for fitting a vacuum gauge. This is suitable for HS6 and HIF44 and is 6.3mm thick.

($17.93) £17.93 exc vat

($21.52) £21.52 inc vat
People also bought products
VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS
VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat
HIF44 CARB REPAIR KIT WITH PLAIN THROTTLE DISC
CRK162

($79.01) £79.01 exc vat

($94.81) £94.81 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

($19.60) £19.60 exc vat

($23.52) £23.52 inc vat
HIF44 CARB LINKAGE
LZX1739

($28.98) £28.98 exc vat

($34.78) £34.78 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

($7.65) £7.65 exc vat

($9.18) £9.18 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

($1.16) £1.16 exc vat

($1.39) £1.39 inc vat
CONVERSION KIT waxstat to standard jet (linkage on...
BFS701SUL

Linkage set for Converting from waxstat to standard type jet for one single carb .

($20.28) £20.28 exc vat

($24.34) £24.34 inc vat
CARB HIF38 REBUILD KIT
CRK274

For HIF38 carbs,this is the full rebuild kit with the spindle and throttle disc and bushes--- see CSK94 for service kit

($92.88) £92.88 exc vat

($111.46) £111.46 inc vat
ANCHOR TAG ON CARB
12A4

($0.66) £0.66 exc vat

($0.79) £0.79 inc vat
CARB REBUILD KIT FOR HIF44 TURBO CARB
CRK269

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

($87.11) £87.11 exc vat

($104.53) £104.53 inc vat
CARB HIF44 FULL REBUILD KIT EXCEPT TURBO
CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

($97.68) £97.68 exc vat

($117.22) £117.22 inc vat
PETROL PIPE BRAIDED 5/16" BORE X 2.5"
21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

($2.15) £2.15 exc vat

($2.58) £2.58 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

($11.93) £11.93 exc vat

($14.32) £14.32 inc vat
HIF44 CARBURETTOR
FZX3006

THIS CARB IS A GREAT TUNING AID ON TUNED ENGINES, ESPECIALLY 1380cc.

($624.18) £624.18 exc vat

($749.02) £749.02 inc vat
T PIECE 5/16"
MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

($4.28) £4.28 exc vat

($5.14) £5.14 inc vat
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
CARB BUTTERFLY KIT 1.5"
WZX1323

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

($14.81) £14.81 exc vat

($17.77) £17.77 inc vat
JET ASSY HIF38 1275cc
WZX1455A

jet for HIF38 carb and is 0.090 size--for HIF44 see WZX1453A

($16.97) £16.97 exc vat

($20.36) £20.36 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

($20.43) £20.43 exc vat

($24.52) £24.52 inc vat
SPINDLE KIT HS6
WZX1178

Not fitted as standard to the A seriers it found its way on engines as a great tuning aid on tuned engines. this is the spindle only and the disc is WZX1321.We suggest you use a complete rebuild kit if this area has worn-CRK223 which will have to be ...

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat