ENGINE CAM/OIL PUMP LUBE.1 Oz

Converted into a non melting type grease.Favoured by proffessionals for camshaft,lobes and lifter,and any valvetrain to stop scuffing on start up. Also useful for oil pumps to stop drain back on start up

($6.45) £6.45 exc vat

($7.74) £7.74 inc vat

GEARBOX TO BLOCK STEPPED WASHER FOR CORNER BOLT

22A1150

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat

PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...

AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.

this fits engines using the early egg shaped cover

This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

($24.75) £24.75 exc vat

($29.70) £29.70 inc vat

AC DODD RS+ CAMSHAFT

ACD-RSPLUS

AC Dodd Road Sport Plus camshaft, ultimate road cam, lumpy idle but still driveable. Please see picture for full cam specs.

ACD - RS+

Power Band (Rpm): 1750 - 6500

Duration @ 0.016": 268° 268°

D...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

AC DODD ROAD TORQUE CAMSHAFT

ACD-RT

AC Dodd Road Torque cam, great for low end power. Please see picture for full cam specs.

Road torque, this cam for strong low & mid range lugging, Touring, Smooth idle, excellent emmisions

ACD - RT

Power...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

FORGED STEEL CON ROD SET 5.75"LONG 1.625"JOURNAL 2...

C-AEG624EVO

Minispares steel connecting rods are machined by Arrow Precision Eng from double air re-melted 817M40 forgings to X condition. Weight 445g per rod

The new X rod design maintains stiffness whilst reducing weight where it is not required. ARP ...

($1,050.00) £1.050.00 exc vat

($1,260.00) £1.260.00 inc vat

FORGED STEEL CONROD SET 5.75"LONG 1.75" JOURNAL 20...

C-AEG626EVO

Minispares steel connecting rods are machined by Arrow Precision Eng from double air re-melted 817M40 forgings to X condition. weight 452g

The new X rod design maintains stiffness whilst reducing weight where it is not required. ARP 2000 5/1...

($1,155.00) £1.155.00 exc vat

($1,386.00) £1.386.00 inc vat

PISTON RING SET 998/1100 +60

C1072-60

Steel ring set, 3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

($44.80) £44.80 exc vat

($53.76) £53.76 inc vat

PISTON RING SET 998/1100 STD

C1072-00

Steel ring set,for 4 ring pistons. 3 compression rings @ 0.0625" oil rings 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

($35.20) £35.20 exc vat

($42.24) £42.24 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

PUROLATER FILTER BOWL TO HEAD SEAL

12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

REPLACEMENT SEAL O-RING FOR MSA1134. MSA1124/5 DIP...

TRS1316

Replacement O ring for the Minispares range of chrome dipticks

($0.10) £0.10 exc vat

($0.12) £0.12 inc vat

STAINLESS STEEL DRIP TRAY

TOOL32

We all knows Mini's like to leak a little oil... This drip tray is great for protecting your garage floor, low profile and measures 60x40cm.

Perfect for using whilst rebuilding heads, engines and gearboxes to keep all the small pa...

($14.85) £14.85 exc vat

($17.82) £17.82 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

SMART CHARGER BATTERY CHARGER

MW006

Gys flash 4A smart charger ideal for a classic Mini or any classic car that is left for long periods. Comes with both jumper cable type connection and a battery bolt on connections for quick connecting/disconnecting

($89.99) £89.99 exc vat

($107.99) £107.99 inc vat