OIL FILTER TRANSFER PIPE 12A BLOCK WITH early HOUS...
MOC1020

($66.51) £66.51 exc vat

($79.81) £79.81 inc vat

In stockIn stock
To replace the troublesome block to filter head oil transfer pipe on late cars when using an early type filter head to a late type block as fitted to minis from 1992. Pre 1992 engines have 5/8" block union and 1/4" npt thread for the filter head.

12A engines from 1992 on have 11/16"UNF block and 11/16" filter head.

Therefore this kit has 11/16" thread block union and 1/4"npt tapered filter head union.

These are the following options of filter/block sizes for Pipe kits

Block union 5/8" and filter head 1/4"npt use TAM2106BRAIDED

Block union 5/8" and filter head 11/16"unf use MOC1019

Block union 11/16" and filter head 11/16"unf use MOC1018

Block union 11/16" and filter head 1/4"npt use MOC1020

($66.51) £66.51 exc vat

($79.81) £79.81 inc vat

In stockIn stock

Recommended usage 1 x MOC1020 to fit one mini.
Oil Filter Components - Qty 1

Kit contained products
BRAIDED OIL TRANSFER PIPE (WITHOUT BLOCK AND FILTE...
TAM2107

($53.58) £53.58 exc vat

($64.30) £64.30 inc vat
11/16" UNION FOR BRAIDED OIL TRANSFER PIPE
TCZ102

SEAL IS DSM18

($8.42) £8.42 exc vat

($10.10) £10.10 inc vat
1/4" UNION FOR BRAIDED OIL TRANSFER PIPE
TCZ100

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
People also bought products
SPIN ON OIL FILTER CONVERSION KIT
TAM2097FK

A kit to convert the early style cartridge oil filter to the later style spin on filter.

($20.11) £20.11 exc vat

($24.13) £24.13 inc vat
RAMAIR FILTER HIF6/HIF44 1.75" AIR FILTER
RS2-247-401

Ramair’s hugely successful range of filter kits, designed to bolt directly to the carburettor body, is used widely in both competition and street applications. The element is of sturdy construction, supported by a stainless steel cage and provides ma...

($48.11) £48.11 exc vat

($57.73) £57.73 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
LOWER POLY STABILISER BUSH KIT
C-STR633

Stabiliser bush kit for lower engine steady

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE
C-AEM91886-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat
SIMPLEX TENSIONER 6 PIECE SPECIAL KIT
MSSK051EVO

Parts required to stop timing chain rattle on A plus engine using special anti stretch single row chain 3H2127EVO.Last chance to buy with the plate and pin to hold the tensioner as they are obsolete from Rover.

Fitted to 998/110...

($35.16) £35.16 exc vat

($42.19) £42.19 inc vat
WATER PUMP 3 YEAR GUARANTEE MPI only
GWP188EVO

MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...

($19.50) £19.50 exc vat

($23.40) £23.40 inc vat
SUPER WATER PUMP LESS BY PASS-3 YEAR GUARANTEE-PRE...
GWP187EVO

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

($18.75) £18.75 exc vat

($22.50) £22.50 inc vat
SUPER WATER PUMP LARGE IMPELLER WITH BYPASS
GWP134EVO

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...

($18.75) £18.75 exc vat

($22.50) £22.50 inc vat
DUPLEX STEEL GEARS WITH EVO CHAIN
C-AJJ3325EVO

Ultra light non-adjustable steel duplex timing gear and chain set with locktab and countersunk screws but with a 2H4905EVO limited stretch race quality chain.

If you are working on your engine and you want to do it right then yo...

($71.34) £71.34 exc vat

($85.61) £85.61 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROCKER COVER SEALS.SPACERS AND WASHERS PAIR
SAC70

Chrome fittings for rocker covers. Kit includes 2 of, rubber seals, chrome washers and spacers.1 kit required per engine.

these are the best quality chrome parts we could find in the market

($6.33) £6.33 exc vat

($7.60) £7.60 inc vat
ROCKER COVER SILICON GASKET 11 STUD HEAD
GUG5038EVO

Upgraded rocker cover gasket made in silicon, cut outs for 11 stud head and ideal when rocker cover is removed on a regular basis.

Rarely you may require longer rocker cover bolts when fitting this so use CAM6823.

($8.75) £8.75 exc vat

($10.50) £10.50 inc vat
TIMING CHAIN DUPLEX LIMITED STRETCH TYPE
2H4905EVO

Race quality heavy duty double row performance endless timing chain. It is the best chain available and used by top engine builders, also fits MGB/Midget. This chain is for duplex gears that is used by racers as a limited stretch heavy duty version m...

($19.64) £19.64 exc vat

($23.57) £23.57 inc vat
TIMING CHAIN SINGLE ROW SPECIAL QUALITY
3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat
4° OFFSET WOODRUFF KEY
WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat