RAD TOP BRACKET GROMMET AND LOWER ON 2 PIECE COWLI...
11G227

£1.00 exc vat

£1.20 inc vat

In stockIn stock
This grommet is used on all top radiator to cylinder head brackets plus the bottom bracket on earlier two piece radiator cowlings.It replaced the CAM4414 flatter bush originally fitted to the top bracket from 1974 on one piece cowlings

£1.00 exc vat

£1.20 inc vat

In stockIn stock

Recommended usage 4 x 11G227 to fit one mini.
Radiator & Fittings - Qty 4
Radiator & Fittings - Qty 2
Radiators pre 1996 - Qty 2
Radiators Fans, Hoses, Expansion Tank Pre 1996 - Qty 2

Recommended products

This sleeve is used with the 11G227 grommet on all one piece radiator surround top brackets.

In 1974 the mini changed from a two piece to a one piece cowling. These bolts ONLY fit the two piece pre 1974 cowling.

Fixes fan blade to water pump and corner bars to overider on deluxe bumpers. Also used for locating plate AHU2379.

People also bought products

Similar to C-ARA4401 but supplied without the fan controller. This kit is ideal if you want to wire the fan to a fan switch.

Long lasting silicon by pass hose between cylinder head and water pump.

These are easy to cut and slide on easier than the old conventional rubber type.

It has been made this length to fit 1275cc engines which used the longest hose....

MK1 fresh air hose clip on righthand inner wing, can be used on mk4 onwards lefthand fresh air vent hose.

Replacement plug and washer for Minispares 2 core and 4 core radiators. M22 x 1.5

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

Mini air conditioning compressor, as fitted to any model of Mini with air conditioning as a factory option including Japanese spec cars up to chassis number 134454.

Oil cooler union for the block on pre 1992 cars. This special fitting is 5/8 to -08AN and designed for motorsport customers who want to make their own oil cooler or transfer pipe using the larger -08AN braided hose comonly sold at most motorsport out...

Oil cooler union for the block and filter housing on 1992-1996 cars. This special fitting is 11/16 to -08AN and designed for motorsport customers who want to make their own oil cooler or transfer pipe using the larger -08AN braided hose comonly sold ...

Oil cooler union for the filter housing on pre 1992 cars. This special fitting is 1/4 NPT to -08AN and designed for motorsport customers who want to make their own oil cooler or transfer pipe using the larger -08AN braided hose comonly sold at most m...

As fitted to MKI minis and variants. Original style tube of rubber material wrapped over a wire coil. As an improvement to the original design, these are also bonded to a nylon interior membrane for additional strength and the wire coil is galvenised...

Heater vent demister covers for the pre 1969 heater assembly.

Oil cooler union for later cars, will fit the oil filter head and block, 1/2" BSP to 11/16". Requires DSM18 to seal. These are handy when you have changed to a later filter head etc and want to fit an early oil cooler kit.

Silicone hose kit for 998 vehicles from 1989 onwards that were equipped with the plastic inline heater valve, comes complete with moulded heater take off pipe and 5/8 heater pipe.

Silicone hose kit for 998 vehicles from 1989 onwards that were equipped with the plastic inline heater valve, comes complete with moulded heater take off pipe and 5/8 heater pipe.

Heater hose that comes from the cylinder head take off to the plastic inline heater valve on 998s 1988 on - this can also be used with a heater take off on 1275cc engines.

Heater hose that comes from the cylinder head take off to the plastic inline heater valve on 998s 1988 on - this can also be used with a heater take off on 1275cc engines.

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...