£21.76 exc vat
£26.11 inc vat
In stock
30-3/16"x1"
25-1/4"x3/4"
20-1/4"x1"
15-1/4"x1.5"
25-5/16"x3/4"
15-5/16"x1"
10-5/16"x1.5"
10-3/8"x1"
£21.76 exc vat
£26.11 inc vat
In stockRecommended usage 1 x GMS114 to fit one mini.
assorted plain steel UNF nuts with approx qty - 100-3/16" 80-1/4" 70-5/16" 40-3/8"
assorted flat washers with approx qty- 200-3/16" 200-1/4" 200-5/16" 100-3/8" 50-7/16" 50-1/2"
Assorted UNF lock nuts with approx quantity's:
80 - 1/4"
60 - 5/16"
40 - 3/8"
20 - 7/16"
20 - 1/2"
Engine mount bolt kit for manual cars, 1 kit requried per car.
Lightweight drilled version of 21A2596. This bolt is drilled all the way through to allow easy adjustment of Hilos.
5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap
Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.
Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.
FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.
Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.
Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud
Special thread cutting screw 1/4 UNF 1.25" (31mm) long.
Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...
Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}
Self tap screw No10 for holding wiper motor strap to body and any other use.
M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)
Wing nut to secure the air filter box on Cooper & Cooper 'S' models.
New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...
Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.
Also the bolt to hold the starter motor.
Also the bolt for the [...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.