£30.09 exc vat
£36.11 inc vat
£30.09 exc vat
£36.11 inc vat
Recommended usage 1 x WZX1414 to fit one mini.
Small hose clip for 1/4" fuel line (our part number PETROLPIPE)
Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only
Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.
For turbo models see WZX1095 .Quantity required-1
spindle threaded both ends for HIF44 for most late carbs--see WZ1127 for spindle with thread one end only as per early metro cars. Thread size is 1/4 BSF
jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")
Plain butterfly disc kit for the HIF38 carb,which we sometimes order in in as requested by the customer as they are very slow selling--same size butterfly on all 1.5" carbs
Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...
Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...
Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.
Gaskets and spindle/float lid seals for all the HIF38/44 range.
For HIF38 service kit see CSK94 for mini and CSK78 for metro
for HIF44 see CSK75[/lonk] except turbo
[link]CRK167 rebui...
Our heavy duty throttle cable is superior in many ways.
A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.
Cable to carb bolt is ACC5062.
Clip on the heater valve for heater cables on vehicles from 1990 where the in line remote heater valve was used. It has also been used as a clip for HIF carbs to hold the cable but the one from Rover is 13H3472.
If you have fitted our inlet and exhaust manifolds plus an RC40 exhaust to a stadard 1275cc engine this needle in a HIF44 carb will work great if coupled with a K&N pancake filter.
A very usefull tuning needle for single and twin carbs when camshaft change for carbs with floating needles.