PETROL CAP WITH ASTON LOOK FOR PRE '96 CARS
SP227

(¥17) £17.00 exc vat

(¥20) £20.40 inc vat

In stockIn stock
Top quality overcap only accepts the genuine locking capsWLD100660 or GSS154A that were originally fitted standard by Rover

This cap fixes to the petrol tank neck so that the genuine locking cap fits snuggly inside so that both pieces cannot be stolen. Ultra easy to install and looks fantastic. Large 3.5" face! Designed to look expensive, this '60s style cap features a flip-up top that uncovers a locking gas cap. The whole unit installs and opens as easy as a locking gas cap.

Does Not fit Twin Points as the neck is too short on the tank. The slimmer mpi seal WGG100010) has helped fitting in a few cases but not guaranteed.



PLEASE NOTE THIS IS THE OVERCAP ONLY AND NEEDS A SEPERATE GENUINE LOCKING CAP.

(¥17) £17.00 exc vat

(¥20) £20.40 inc vat

In stockIn stock

Recommended usage 1 x SP227 to fit one mini.

Recommended products

For all mini pickups, vans, estates and MK1/2 Minis. Any early minis without a vent on the top of the tank can also use this cap.

A vented cap has been fitted to Minis during its history but must not be fitted to any Injection cars as they r...

Stainless steel polished locking cap for all post 1970 cars-non vented.

Comes with 2 keys.

Alternative products

Designed to look expensive this 60s look cap fits over the genuine Rover locking cap WLD100660 held on by grub screws. Polished alloy finish similar to the Aston or john Cooper cap it is ultra easy to install and looks fantastic. Flip to...

People also bought products

Black version of SP228



The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza' and 'LeMans'. The design was conceived for function not...

Fuel tank to boot floor seal for cars that had a drain tube through the boot floor.

Petrol tank sender unit for saloon models 1959 until 1964 screw on type, for Minis fitted with no voltage stabiliser.

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

5/16" UNF cage nut as fitted to CZH3241 tank bracket on cars fitted with a 7.5 Gallon fuel tank. Uses 13H7583 bolt

7.5 gallon tank has both pump and sender unit holes for injection cars only. Some people use this tank for turbo applications however.

MPI 7.5 gallon tank has both pump and sender unit holes. Some people use this tank for turbo applications. This tank has the shorter neck with restrictor for lead free fuel nozzles as required by Japan and Germany and uses the thinner neck seal [link...

Non Genuine, fits saloons from 1974 until the introduction of injection.

First fitted to 1275GT in 1974 with 12"wheels and all mini saloons from 1980 on

7.5 gallons or 34 litres capacity and the tank is retained by the single stra...

Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...

Original 7/16" spring type hose clip as used on later cars (approx 1990 on) for some radiator hoses and fuel lines.

Replacement screws and nylon inserts for the Van, Estate and Pick up petrol tanks.

5/16" bore petrol hose for injection cars sold in metre lengths.

Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.

5.5 gallon left hand tank with twist in sender unit.

For all mini saloons from 1964 until 1980 except Elf and Hornet. Also except the 1275GT from 1974 which used the later 7.5 gallon tank which became standard fitment to all mini saloons fro...

Support bracket for the R/H, genuine Heritage part, can also use our own bracket 21A1329.

Gasket/seal for mounting the fuel pump to tank for SPI and MPI Mini's

If you've ever changed a fuel filter on an injection car you may have noticed you need to remove the whole bracket in order to remove the filter as the securing bolt is on the wrong side for good access, this is because the bracket was originally use...

Under floor short metal pipe from tank to filter on MPI injection from VIN WD169754---earlier cars and single point cars used WJP10209 pipe which had a different union which fitted GFE7059 fuel filter plus a union (WKB10019)...

This is a copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monz...