REMOTE HOUSING SHORT BOLT 3/8" x 1" UNC
GFK5240

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat

In stockIn stock
Remote type gearboxes had four UNC bolts holding the long alloy housing to the differential case. These are the shorter two, 3/8"unc 1"long. The longer two are ZCS628.

Also the bolt to hold the starter motor.

Also the bolt for the DAM5922 Verto slave cylinder platform to the clutch case.

Also the bolt for pre verto slave cylinder GSY110 to clutch case.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat

In stockIn stock

Recommended usage 2 x GFK5240 to fit one mini.
Verto Clutch & Slave Cylinder 1982 ON - Qty 2
Gear Change Up to 1972 Not Rod Change - Qty 2
Clutch cylinders and flywheel case - Qty 2

Recommended products

Two of these long UNC bolts are required to hold the alloy remote control to the gearbox diff housing on Remote type gearboxes. The two short UNC bolts are GFK5240.

People also bought products

Boot hinge gaskets and fittings for original type hinges

5/16" UNF THREAD 2 1/2" LONG bolt commonly used for 21A2838 petrol tank strap

Stainless steel version of GFK5184, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

Bolt for the top alternator bracket on mpi cars.

Stainless steel version of GFK5185, worth keeping a few spare as they are one of the most common bolts fitted to the Mini.

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

Screw for chrome metal number plate lamp on mk3 19790 on - You will have to drill the lens out to take M4 screw.

m6x10 bolt--ideal for radiators with metric fittings (6 required for rads)

original imperial radiator screws were SH604031 or PK type were ARA1117

Clutch housing bolt to engine long 5/16" UNC 1.75" long Fitted ffrom 1985 for clutch housing instead of 22A152 stud

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

Clutch housing bolt to engine long 5/16" UNF 1.75" long with tuflock patch to secure. Earlier bolts less tuflock are {link]BH605141{/link}

Self tap screw No10 for holding wiper motor strap to body and any other use.

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...

There are 3 of these bolts fitted -1.75"long 5/16"UNF bolt ALTERNATIVE DAM7758.

Also used as longer bolt for water pump.

Also for the 21A1091 heavy duty tie rods on front suspension.