($400.00) £400.00 exc vat
($480.00) £480.00 inc vat
In stock
($400.00) £400.00 exc vat
($480.00) £480.00 inc vat
In stockRecommended usage 1 x KGB10024 to fit one mini.
Subframe supplied is KGB10024 Auto front subframe, but complete with an engine mounting kit to fit a manual engine and gearbox at this bargain price. Makes a cheaper alternative to a standard manual frame.
Complete set of bolts to mount the front subframe on all post 76 single bolt subframes less the large tower bolts and towing eye, enough fixings are supplied for those who wish not to use a towing eye.
From Xparts - but not original Rover - 2 of these rubber mountings are fitted at the front of the front subframe on all vehicles from 1976 (mk4) on. To help quieten road and engine noise. To stabilise steering by stopping subframe movement we suggest...
This subframe does not have mounting points for twin point injection front mounted radiator. It is also okay for 1000cc cars but you need to change to 21A1817 top stabilser bar as the engine sits 1/2" forward as per all 1300 engines cars...
Priced each, 2 of these are fitted to the rear of the front subframe on all cars from 1976 on. These original rubber type can be replaced by alloy or other equivalents, see our accessory catalogue. Also see 21A2599 for genuine.
2 of these rubber mountings are fitted at the front of the front subframe on all vehicles from 1976 (mk4) on. To help stabilise steering by stopping subframe movement. We do many equivalents so see our accessory catalogue, also see 21A2624
New Evolution design in 4mm thick metal mase to fit Genuine and our non genuine subframes better than the standard originals.
The amount a wheel leans in or out at the top is called "camber". As the car turns and the body leans the tire can ...
This is a budget way of improving the stability of the front subframe leaving the rear mountings standard for quietness.
It only includes the 4 poly tower spacers and for the front of the front subframe 2 poly spacers and 2 metal washers.
The set of four aluminum top front subframe mountings are to replace the standard rubbers fitted on vehicles from 1976 to present date. These alloy pads help reduce subframe movement, which is detrimental to handling when driven hard. As the original...
Rear solid brackets for the front subframe of post 1976 models, ideal for racing or road if noise is not important. But very important if you are after the ultimate handling! we have tried the poly type but they were not as successful.
Fitted to rubber mounted subframes from 1976 on this packing piece goes between the front panel and the subframe mounting points. You might be surprised how many of these were fitted to your car when it came out the factory. When replacing the front ...
Genuine Mini Spares UK made complete joint with the following specifications,
correct dimensions and shape of pin and ball in EN24T, using correct spec grease,
genuine original shape cup using correct material (21A423MS...
Rebound buffer that fits under the top arm now in polyflex, mounted on a stainless steel mounting base
O/S/F wing t for 1996 on cars. THIS WING STILL NEEDS MODIFYING to allow for fitting of Sportspac arches and 13" wheels. After trimming/cutting to size remember to replace or renew the stiffener lip ALR360380
Has the headlamp re...
Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).
Small angled bracket fitted by factory to stiffen front wings to A panels
Original style metal grease tube, a direct replacement for the plastic ones which are prone to splitting. Made to original BMC specification and zinc plated for longer life.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.