FUEL TRAP INTAKE FOR SINGLE POINT INJECTION

NPC10001

£19.47 exc vat

£23.36 inc vat

In stock

Fits on the back of the engine as a fuel trap.

There are 4 vacuum pipes on the single point injection cars.

MLH10022 Which has angled ends,fitted from inlet manifold to fuel trap.
MLH10026ECU to fuel trap.
PHP10027Air box underside to airbox hot air control valve.
PHP10043Airbox underside to airbox upperside hot air control valve.

green to ecu

black to inlet

£19.47 exc vat

£23.36 inc vat

In stock

Recommended usage 1 x NPC10001 to fit one mini.

Power unit electrics SPI - 1275CC - Qty 1

People also bought products

MONZA PETROL CAP WITH COLLAR BLACK

SP228BLACK

Black version of SP228

The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza' and 'LeMans'. The design was conceived for function not...

£16.50 exc vat

£19.80 inc vat

SPIN ON OIL FILTER CONVERSION KIT

TAM2097FK

A kit to convert the early style cartridge oil filter to the later style spin on filter.

£20.11 exc vat

£24.13 inc vat

ENGINE MOUNT BOLT KIT FOR ALL MANUAL TYPES

21A1902FK

Engine mount bolt kit for manual cars, 1 kit requried per car.

£3.83 exc vat

£4.60 inc vat

VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS

VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

£9.75 exc vat

£11.70 inc vat

AC DODD RS+ CAMSHAFT

ACD-RSPLUS

AC Dodd Road Sport Plus camshaft, ultimate road cam, lumpy idle but still driveable. Please see picture for full cam specs.

ACD - RS+

Power Band (Rpm): 1750 - 6500

Duration @ 0.016": 268° 268°

D...

£214.40 exc vat

£257.28 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

OXYGEN SENSOR LAMBDA UNIT (SPi & MPi) BOSCH

MHK10004BOSCH

Genuine Bosch lambda sensor, fitted to both the twin and single point injection cars and fitted in the same exhaust manifold shared by both cars. Be warned the cheaper non branded sensors cause lots of issues hence we only sell the Bosch version.

£78.57 exc vat

£94.28 inc vat

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

£1.60 exc vat

£1.92 inc vat

SPI THROTTLE BODY GASKET

LZV1101GASKET

Gasket for SPI throttle body spacer. 2 required

£0.50 exc vat

£0.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

£299.00 exc vat

£358.80 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60

C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

GENUINE SU HS STAYUP FLOAT KIT

WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

£19.60 exc vat

£23.52 inc vat

HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS

C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

£51.92 exc vat

£62.30 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

PETROL TANK STRAP RETAINING BOLT