SERVO FITTING KIT

This kit includes all the parts to fit the 13H7939 (SEN43) Mk3 Mini servo. It includes all the parts supplied in the SEN43 servo kit (except the servo) but with the original type brackets rather than universal ones.

£51.69 exc vat

£62.03 inc vat

CLAMP PLATE FOR SERVO BRAKE PIPES COOPER 'S' & EA...

2H400

Clamp plate to hold servo brake pipes. Two required. Fitted to Cooper S and early 1275 GT. 1963 TO 1974.

£2.50 exc vat

£3.00 inc vat

BRAKE MASTER CYLINDER TO SERVO BODY SEAL 89 ON

NAM8570

Seal for between the brake servo and master cylinder, fits all late 1988 onwards vehicles where the master cylinder was mounted directly to the servo unit.

£1.25 exc vat

£1.50 inc vat

SERVO GROMMET / SEAL FOR VAC PIPE TO BODY CASING

NAM8569

Replacement rubber grommet for the servo vacuum hose for the 1992 onwards brake servo (GSM119)

£2.48 exc vat

£2.98 inc vat

MASTER CYLINDER PAIR OF BRAIDED BRAKE LATE SERVO H...

SEN45

From 1989 minis which have the brake servo built into the master cylinder and it is very difficult to work in the engine bay, especialy clutch changes because of the extra room taken up by this dual cylinder. By replacing the 2 metal brake pipes from...

£39.74 exc vat

£47.69 inc vat

PLUG 5/8UNF X 5/8 SCREW INLET MANIFOLD

5-8UNF

This plug fits our inlet manifolds and Rover types with servo take off holes..

5/8 UNF grub screw that use 8mm allen key for blanking inlet servo take off or temp transmitter hole at front of pre 1996 cylinder heads. Can also use ADP210

£1.00 exc vat

£1.20 inc vat

COOPER S SERVO BRACKETS Mk1 & Mk2

21A1294

A pair of black painted servo brackets for MK1 cars or when using the 21A1293 servo.

£13.50 exc vat

£16.20 inc vat

INLINE SERVO NON RETURN VALVE

17H2646

Genuine AP product-HOSE FITTING EITHER END in-line brake servo valve which is essential if you do not have the correct U shape section formed in the servo hose to stop petrol contaminating your servo. Not supplied in any kit it is an important part. ...

£16.82 exc vat

£20.18 inc vat

SERVO COOPER S MK1/2 AP 5.5 type

21A1293

Mini Spares copy of original AP Lockheed Mk1/Mk2 "S"servo which have not been available for decades. Using the correct cast iron body it is dimensionally the same as the 5.5 Lockheed type 112756 as fitted to the original Cooper S Mk1/2.

(Thi...

£180.00 exc vat

£216.00 inc vat

AIR VALVE FOR 13H7939 SERVO

LK11032

now in a plastic housing this is the air valve for the single brake line servo

which was not always available by the factory but has been made for us again by

AP Braking

£24.00 exc vat

£28.80 inc vat

SERVO FITTING KIT

MSSK007

This kit includes all the parts to fit the 13H7939 (SEN43) Mk3 Mini servo. It includes all the parts supplied in the SEN43 servo kit (except the servo) but with the original type brackets rather than universal ones.

£51.69 exc vat

£62.03 inc vat

SERVO REPAIR KIT FOR 13H7939 MK3 SERVO & SEN43

18G8938

The latest model of the servo used on the Mini and some other cars is a very dependable unit. But it still has rubber parts inside and these do wear out. Several things will tell you when it's too late to do preventative maintenance. If you are slow...

£52.50 exc vat

£63.00 inc vat

UNIVERSAL AP SERVO FITTING KIT

SEN44

This kit is useful for mini based kit cars, sprites and morris minors but are parts included in the SEN43 complete servo kit.

£13.62 exc vat

£16.34 inc vat

CLEVIS PIN FOR SERVO 89 ON

NAM8540

Special plastic covered clevis pin(first one to appear on a mini) is for the later brake system with servo and intoduced on single point injection.

£6.95 exc vat

£8.34 inc vat

SERVO REPAIR KIT FOR GSM119 SERVO / LK10125

GSM120

Servo repair Kit for all models after 1989/90 where the servo is buit into the master cylinder. The gaiter for the brake pedal is NAM8567

£103.50 exc vat

£124.20 inc vat

SERVO FOR LATEST TYPE BRAKE MASTER CYLINDER 1988 o...

GSM119

This Servo is the integral part of the master cylinder as fitted on the production line of Rover from October 1988 on. Includes NAM8569 and NAM8570.

See NAM8570 for seal to master cylinder.

£199.97 exc vat

£239.96 inc vat

SERVO KIT COMPLETE SINGLE LINE ONLY

SEN43

Genuine AP Original Mk3 Cooper S and 1275GT servo is now supplied as this universal kit for single line brake systems. This kit replaces the servo originally sold on its own at no greater expense, but the brackets are universal for fitment to any veh...

£255.00 exc vat

£306.00 inc vat

MINI MPI BLACK MOULDED CARPET ONE PIECE SET 1997-2...

CK906A

We are now able to offer the origianl style 1 piece moulded carpets as fitted to 1997-2000 cars, these come supplied with the underlay although it is available separately under part number CK907. You could fit this carpet to any rod change Mini with ...

£234.00 exc vat

£280.80 inc vat

AP BRAKING DOT4 BRAKE FLUID 500ML

SSB9424

£3.00 exc vat

£3.60 inc vat

WASHER FOR BRAKE SERVO NON RETURN VALVE

11D5070

Washer for 17H2646ORIGINAL brake servo non return valve

£0.70 exc vat

£0.84 inc vat

GENUINE AP LOCKHEED HANDBRAKE LEVER GAITOR

17H7612GENUINE

Rubber gaiter to keep debris from entering the drum via the backplate handbrake lever SMN10005. Sold singly per backplate, 2 required per car.

Genuine AP Lockheed rubber boot

£5.03 exc vat

£6.04 inc vat