MANIFOLD LCB CARB WITH CAT+LINK PIPE

Basically the C-AEG373 LCB exhaust manifold but with a link pipe for retaining the catalyst on carb models after 1990-92.

£154.56 exc vat

£185.47 inc vat

MANIFOLD Y PIECE FOR STD BORE LCB WITH TEST PIPE T...

C-AHT195

"Y" Piece for Maniflow LCB C-AEG375 with test pipe sensor take off (not lambda).

£52.50 exc vat

£63.00 inc vat

MANIFOLD LCB NEW CARB COOPER WHEN DELETING CATALYS...

C-AEG373

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FITTING CARBURETTOR POST 91 VERSION CARS WHEN REMOVING THE CATALYST AND FITTING RC40 EXHAUST.

Take off in "Y" piece. If the catalyst is to be retained use C-AEG368 which inclu...

£99.06 exc vat

£118.87 inc vat

MANIFOLD DOWNPIPES ONLY FOR INJ WHEN DELETING CAT

C-AEG372

Downpipes to fit onto the original exhaust manifold when deleting the catalyst on fuel injected minis and fitting an RC40 complete system.

£83.39 exc vat

£100.07 inc vat

MANIFOLD METRO LCB LMO22

C-AEG366

With half washers on back of flanges for the extra width of the original CAM6618 MG metro inlet manifold. Similar to C-AEG365 but 0.375" shorter to fit in the metro mini engine bay also, but also ideal for small bore engines...

£100.05 exc vat

£120.06 inc vat

DOWNPIPES AND LINK PIPE FOR INJECTION CARS

C-AEG371

Downpipes to fit onto the original exhaust manifold when retaining the catalyst on fuel injected late Coopers. Manual cars only

£121.70 exc vat

£146.04 inc vat

STAINLESS STEEL LCB MANIFOLD - C-AEG365 (SSLM004)

C-AEG365S

Stainless steel Standard bore LCB (1-3/4"id) that is ideal for very hot small bore engines, for standard to high performance 1275s, and for street 1380s. And in stainless steel for long life!

There is NOT enough clearance room when fitti...

£221.27 exc vat

£265.52 inc vat

MANIFLOW SIDE EXIT 1.75" TWIN BOX EXHAUST SYSTEM

C-ARA331

Standard larger 1.750" bore twin box exhaust system for saloons.

see C-ARA339 for van and pickups.

£114.48 exc vat

£137.38 inc vat

MANIFLOW SINGLE BOX 1.75" BORE SYSTEM TWIN TAILPIP...

C-ARA340

Standard bore the rear silencer box has twin upswept chrome DTM style tailpipes.

£159.00 exc vat

£190.80 inc vat

MANIFOLD 8 PORT EXHAUST LM9

C-AHT343

Exhaust freeflow manifold for 8 port heads only-equivalent to an LCB

£538.95 exc vat

£646.74 inc vat

MANIFLOW FROM CATALYST BACK TWIN BOX 92 on EXHAUST...

C-ARA336

For all cars with a catalyst--this section fits from the catalyst back and has 2 silencer boxes.1.75" bore

£136.74 exc vat

£164.09 inc vat

MANIFLOW CENTRE EXIT TWIN BOX 1.7/8"BORE EXHAUST S...

C-ARA338

this is centre exit 1.8750 bore size exhaust system when no catalyst is required and fits over the standard LCB or in a large bore LCB

£142.80 exc vat

£171.36 inc vat

MANIFLOW SINGLE BOX 2"EXHAUST SYSTEM SIDE EXIT

C-ARA333

Not road legal except for turbos this is a 2" bore single box system. Side exit

and for twin box see C-ARA334

£147.15 exc vat

£176.58 inc vat

MANIFLOW TWIN BOX SIDE EXIT 1.7/8"BORE EXHAUST SYS...

C-ARA337

This is for 1.8750" bore side exit when there is no catalyst

See C-ARA338 also

£135.15 exc vat

£162.18 inc vat

DOWNPIPE ONLY WITH KNUCKLE FOR MINI TURBO EXHAUST

ET3

The correct length and size downpipe when fitting a turbo power unit into a mini with a knuckle joint for extra longevity. 2" outside diameter pipe

£53.74 exc vat

£64.49 inc vat

MANIFLOW CENTRE EXIT TWINBOX 1.75" BORE EXHAUST SY...

C-ARA332

1.75" bore twin box, centre exit exhaust system. This exhaust system by Maniflow is straighter and louder than the RC-40. Very high quality with a skid plate on the bottom of the muffler and a polished stainless tip.

£119.36 exc vat

£143.23 inc vat

MANIFLOW ARBARTH TWIN ADJUSTABLE OUTLET EXHAUST SY...

C-ARA341

Arbath design exhaust system with adjustable tailpipes-s/steel tailpipe ends

£245.78 exc vat

£294.94 inc vat

INJECTION LCB MANIFOLD WITH CAT LINK PIPE

C-AEG369

Standard bore LCB (inch and three quarters internal diameter) for post 1990 cars with catalyst that is ideal for for standard to high performance 1275s and for street 1380s. The best quality production manifold is made by Maniflow. The Long Centre B...

£141.40 exc vat

£169.68 inc vat

MANIFOLD DOWNPIPES FROM EXHAUST MANIFOLD+PIPE.CARB...

C-AEG370

Downpipe with sensor take off hole to fit the original exhaust manifold on the late (from 1990) Mini Cooper and MG Metros when using HIF6/44 carburettors. Y piece outlet end is 1.875" outside diameter, 1.75" inside diameter.

This part comes ...

£104.47 exc vat

£125.36 inc vat

MANIFOLD INLET WEBER 45 DCOE 3.5" MANIFLOW STEEL

C-AHT777

3.5" long steel intake manifold by Maniflow for Weber 45 DCOE/DHLA.

£170.13 exc vat

£204.16 inc vat