1st motion (input) shaft for 3-sync straight cut/close ratio gearboxes.
22 teeth
straight cut reverse gear for the 4 synchro Pre Rod chabge gearbox we use the 16 and 18 teeth pattern for longevity. £42.09 exc vat £50.51 inc vat
See table of "Straight Cut Gear Kits" and their components
LAYGEAR STRIGHT CUT FOR A PLUS GEARBOX IN ORIGINAL ST RATIO £105.02 exc vat £126.02 inc vat
TOOTH COUNT 15-19-23-25---this takes 2-CHM141 bearins
See table of "Straight Cut Gear Kits" and their components
STRAIGHT CUT 3RD GEAR FOR 4 SYNC SPECIAL TUNING GEARSET
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undoe the large mainshaft and Ist motion nuts,...
In 4 synchro gearbox it's a critical part of the close ratio gear set. Be sure to check your old one for wear on the inner surface of the layshaft bearings; it wears out far faster than the gear teeth! Pre A+.For A Plus see C-22A1737A 15...
24 tooth straight cut 3rd gear 3 synchromesh Mini only.Beware a company has produced a 25 tooth variety which is a dumb ratio
24 tooth straight cut gear as per original Special Tuning ratio. Beware a company has made a 25 tooth gear giving a dumb ratio.
Originally sprite and mini straight cut gears were the sam but with modern technology it was found smal...
Straight cut reverse gear for rod change box. Has 16 and 18 teeth. £73.47 exc vat £88.16 inc vat
See table of "Straight Cut Gear Kits" and their components
Made especially for the Spridgets to overcome junmping out of gear where hubs or selectors are worn, this is the same original ST ratio but with slightly different dog teeth design. Same for 2nd and 3rd.
STRAIGHT CUT FIRST MOTION GEAR FOR PRE A+ GEARSET £95.25 exc vat £114.30 inc vat
19 teeth
See table of "Straight Cut Gear Kits" and their components
STRAIGHT CUT FIRST MOTION GEAR FOR A+ GEARSET ORIGINAL ST RATIO £95.25 exc vat £114.30 inc vat
19 teeth
See table of "Straight Cut Gear Kits" and their components
Straight cut laygear for SC/CR 3-sync gearbox.teeth count 13-17-20-23
STRAIGHT CUT 1ST GEAR FOR 4 SYNC SPECIAL TUNING GEARSET. £54.35 exc vat £65.22 inc vat
See table of "Straight Cut Gear Kits" and their components
UK made straight cut A PLUS gear kit includes 1ST,2nd,3rd gear,1st motion shaft,reverse gear and laygear for Rod change. Please order genuine C-22A1741 baulk rings when fitting this gear kit or if using your own please make sure they do not rock on ...
straight cut reverse gear for the 4 synchro Pre Rod change gearbox we use the 16 and 18 teeth pattern for longevity.
This new evo gear is fully interchangeable for the non evo version.
See table of "Straight...
STRAIGHT CUT 2ND GEAR FOR 4 SYNC SPECIAL TUNING GEARSET
If you are about to undertake a gearbox strip down and you are using an old Haynes manual beware. When locking the gearbox into 2 gears to undoe the large mainshaft and Ist motion nuts,...