Circlip type pin and 4 ring type (3 rings and a scraper)998cc mini--last single piston.

($98.15) £98.15 exc vat

($117.78) £117.78 inc vat

Race quality Single piston ring pack for Mini Spares Evolution Pistons which also fits Mega and Omega pistons. This uses 3 piece oil ring 4mm and 2 of 1.2mm compression ring.

Sold per piston so 4 packs required per engine.

($16.00) £16.00 exc vat

($19.20) £19.20 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +60 OVERSIZE

ADU3490-60

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +40 OVERSIZE

ADU3490-40

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE

ADU3490-00

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to 1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring (3 ring and scraper) P20754 from Hepolite 198...

($152.00) £152.00 exc vat

($182.40) £182.40 inc vat

PISTON RING SET FOR 21250/1 STD

R35960-00

4mm oil ring. These rings fit the current replacement pistons from AE Hepolite range 21250 and 21251 low drag slipper type with 8.1 cc dish and only piston 21251 is now available 8.8CR.

Rover piston TAM2048 stamped 21962 with ring sizes 1.50...

($58.44) £58.44 exc vat

($70.13) £70.13 inc vat

1275 +20 HIGH COMPRESSION PISTON - SINGLE

P21253-20

Low drag 1275 piston standard size 2.780 plus 20 thou oversize(Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.

The best performance 1275 pistons are C-STN100 range which have 9.7...

($73.50) £73.50 exc vat

($88.20) £88.20 inc vat

PISTON SINGLE 1275 LOW DRAG +20 8.8CR

P21251-20

20 thou oversize low drag slipper type pistons for modern day compression ratios and unleaded fuel.

Typically installation will result in a minimum 8.8:1 compression ratio but on some pre 1984 Metro versions it was higher.

Current...

($48.00) £48.00 exc vat

($57.60) £57.60 inc vat

PISTON RING SET 998/1100 +020

R32026-20

3 compression ring @ 0.625" and single one piece oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range. Also available is a high grade ring set c-STN99-20 with 3 piece oil ring

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat

PISTON RING SET FOR 998 A PLUS STD

R33636-00

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.

($63.30) £63.30 exc vat

($75.96) £75.96 inc vat

PISTON RINGSET 998cc +40 PRESSFIT

R43240-40

These Piston rings are +40 oversize with 0.59" compression rings and 0.1181" oil ring fo 998cc

($81.60) £81.60 exc vat

($97.92) £97.92 inc vat

PISTON RING SET 998 A PLUS+20

R33636-20

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.for P20773 pistons

($61.20) £61.20 exc vat

($73.44) £73.44 inc vat

1275 +40 HIGH COMPRESSION PISTON - SINGLE

P21253-40

Low drag 1275 piston standard size 2.780 plus 40 thou oversize(Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.Engine then becomes 1310cc

Current pistons differ from the 60s origi...

($73.50) £73.50 exc vat

($88.20) £88.20 inc vat

PISTON. SINGLE 998 FLAT TOP LATE TYPE 10.3 TO 1 /

P22463-20

These are suitable for press fit gudgeon pin late type 998 con rods.

sold individually with rings and pin complete

Ringsets are available as R43240-20

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

CRANK THRUST WASHER SET STANDARD 998

ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat

AC DODD ROAD SPORT CAM

ACD-RS

AC Dodd Road Sport camshaft, ideal for those wanting the most from a tourer cam whilst still have a smooth idle. Please see picture for full cam specs.

Road Sport, For those requiring the maximum from a tourer cam, excellent road m...

($214.40) £214.40 exc vat

($257.28) £257.28 inc vat

ACL SMALL BORE ENGINE CAM LINER SET

ACL3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

($16.14) £16.14 exc vat

($19.37) £19.37 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275 ACL RA...

C-AEM91120-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($71.78) £71.78 exc vat

($86.14) £86.14 inc vat