DISTRIBUTOR A PLUS ELECTRONIC NEG EARTH ONLY 1275C...
ADU3825MS

($58.50) £58.50 exc vat

($70.20) £70.20 inc vat

In stockIn stock
Negative earth A Plus 59D for any 1275cc with vac unit with modern day driving curves and petrol avaiable.

For best performance and tune we advise our electronic evolution version C-27H7701

Distributors can 'work' long past their useful life! Replacing points and condensor is NOT rebuilding a distributor. If you want to get the most from the performance of your engine a very good distributor is a must! replaces any metro 1275cc engine in a mini or metro--See ADU3825 for Type with contact breakers.



Should be used with GCL216 coil.





Range of modern day curve distributors from minispares-

GEU930 25D 850/early 998

12G2140 23D Cooper S non vac

BAU1962 45D 998/1098

ADU5789 59D 998 A plus

12G4180 45D 1275cc with vac, good for modified road tune engines

ADU3825 59D 1275 with vac, A Plus good for modified road tune

For electronic versions add suffix MS- example= ADU5789MS

Distributor drive spindle if required is 12G3560

Distributor clamp plate is TAM1671

Bolt for clamp is TAM1706

Mini Spares specification for best alround performance electric distributor for std to 276 camshaft profiles see C-27H7698

($58.50) £58.50 exc vat

($70.20) £70.20 inc vat

In stockIn stock

Recommended usage 1 x ADU3825MS to fit one mini.

Recommended products

the bolt that holds distributor clamp TAM1671 in the block on A Plus engines

now obsolete use 3/8"unf bolt with thread length of 1"

Prong type clamp that bolts to the block and retains the A plus distributor in place. The screw is TAM1706.

Pre A plus clamp is 501134

Alternative products

A Plus Electronic Ignition distributor with vac unit, modified to our spec in UK to give best performance on any minis with std to 276 camshaft profile.

Ideal for our EVOLUTION001 camshaft

Brand New distributor complet...

Range of distributors with modern day curves specially built,programmed and tested for Mini Spares in UK.

Beware of the cheap China made units that we have tested and currently offered by other vendors that are poorly made with wrong setting...

People also bought products

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

Sports coil for ballast resistor type ignition.

Best internal parts tested and another intermotor top product.

Its not the name on the outside but whats on the inside which matters.

Original type coil bracket 12G29...

Parts required to stop timing chain rattle on A plus engine using special anti stretch single row chain 3H2127EVO.Last chance to buy with the plate and pin to hold the tensioner as they are obsolete from Rover.

Fitted to 998/110...

rear stop and tail lamp for early BMc cars with red plastic lens.

Also stocked is a white lens and single filament bulb equivalent for use as reverse light on kits cars and Mokes as CHM13REVERSE.

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...