MK1 MINI BOOTLID ALUMINIUM SKIN
HMP441051

($230.00) £230.00 exc vat

($276.00) £276.00 inc vat

In stockIn stock
MkI aluminium boot lid "skin only" panel. This panel is produced off the original tooling, ensuring good panel fit and integrity. Following the pressing of the panel it is hand finished by Heritage craftsmen, to ensure the highest panel quality.

($230.00) £230.00 exc vat

($276.00) £276.00 inc vat

In stockIn stock

Recommended usage 1 x HMP441051 to fit one mini.

People also bought products
REAR BACK PANEL WITH MK1 LAMP CONVERSION
HMP441046

Complete rear back panel section from roof to bumper valance with MK1 lamp and bootlid apertures but the backlight(rear window screen) aperture is only for models from 1967 to 2000. This panel is Not available genuine with the original MK1 size rear ...

($325.00) £325.00 exc vat

($390.00) £390.00 inc vat
BATTERY BOX SALOON - NON GENUINE
MS31

Non Genuine metal battery box. always going rusty owing to the location of where it is fitted. Requires welding in place and preferably painted or a protective coat. Remember to check if the battery cover, strap and clips need changing. Popular afte...

($26.40) £26.40 exc vat

($31.68) £31.68 inc vat
REAR LAMP GUSSET R/H MK1
MS026R

R/H convertion panel from MK2 to MK1. This panel is made to weld into the larger rear lamp hole of MK2 from 1968 to end of production saloon cars back to the original MK1 smaller lamp for either that Retro look or body repairs.

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
REAR LAMP GUSSET L/H MK1
MS026L

L/H conversion panel from MK2 to MK1. This panel is made to weld into the larger rear lamp hole of MK2 from 1968 to end of production saloon cars back to the original MK1 smaller lamp for either that Retro look or body repairs.

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
BLANKING PLUG FOR REAR VALANCE FOG LAMP HOLE 19mm ...
14A7032

latest rear valances have holes drilled for left and right hand drive rear fog lamps so these are the plugs to fill the holes of the side you do not have the lamp

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
MINI BOOTLID INNER FRAME
BMF36001

Mini bootlid inner frame, useful for racers using an aluminium boot skin.

($60.39) £60.39 exc vat

($72.47) £72.47 inc vat
UNDER FLOOR WIRING PIPE CLIP TAG SHORT
CW100110

wiring tag short 25mm and 42mm overall

($1.34) £1.34 exc vat

($1.61) £1.61 inc vat
BOOT BOARD BRACKET SET 5.5 gallon tank 165 tyre
CCC115A

This kit contains all the brackets and mounts required for fitting Minis with 10" 165 tyres.

The boot board bracket 14A9783 is not included

For 10" wheels with 145 tyres see CCC115

For use with boo...

($39.56) £39.56 exc vat

($47.47) £47.47 inc vat
WING TO A PANEL SUPPORT
14A7602

Small angled bracket fitted by factory to stiffen front wings to A panels

($2.30) £2.30 exc vat

($2.76) £2.76 inc vat
BOOT SEAL CLIP KIT
14A6585KIT

Used on all MK1/2/3 bootlids there are 26 little holes drilled around the inner edge to hold the seal on and this kit contains the 26 clips. For single clips see 14A6585. Later cars 1988 on fitted a seal to the body only. (CKE10018)

($10.53) £10.53 exc vat

($12.64) £12.64 inc vat
BONNET LANDER PANEL CLUBMAN
MS149

The only bonnet landing panel available for the clubman shape body for a long time this part is perfect in every detail and was used on the heritage bodyshells.

A Genuine panel is now available from BL Heritage CZH149.

...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
BONNET HOOKS (LARGE) RUBBER
MS118

If you want to hold it in place then this is easy and simple. 4" long rubber hooks can be used on bonnet and/or boot lid. Packaged in pairs with both brackets.

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat
BOOT HINGE GASKET LOWER
24A2176

These gaskets should be changed when replacing the hinges, this one goes between the bootlid hinge on the body, see 24A2175 also for upper on bootlid.

($0.34) £0.34 exc vat

($0.41) £0.41 inc vat
BOOT LID HINGE GASKET UPPER
24A2175

These gaskets should be changed when replacing the hinges-this one goes between the bootlid hinge on the bootlid. See also 24A2176 for gasket on body.

($0.32) £0.32 exc vat

($0.38) £0.38 inc vat
PETROL TANK R/H FUEL TANK 5.5 GALLONS
21A2183

Cooper S Right Hand Tank. Our new perfect fit and shape tank is now in stock. No unsightly "stretch" marks as seen on other tanks that are available, this is a perfect authentic item we are proud of. Approx 5.5 gallon.

See MS82 ...

($277.70) £277.70 exc vat

($333.24) £333.24 inc vat
FIBREGLASS BOOTLID OUTER SKIN ONLY - Mk1 & Mk2
MS110

Very light, rustproof fiberglass boot lid SKIN. MKI replica with numberplate recess.

($60.00) £60.00 exc vat

($72.00) £72.00 inc vat
BOOT LID SEAL EARLY TYPE (REQUIRES 26 x 14A6585)
14A6584

Bootlid seal for Mini <91. Held in place on the boot lid using 26 clips(part# 14A6585).When fitting, the lip part of the seal open end for clips should face the inner boot catch- (the open end of the seal facing inwards to the bootlid al...

($9.15) £9.15 exc vat

($10.98) £10.98 inc vat
BOOTLID HANDLE SEAL
CZH1747

Do not forget to replace this little rubber seal that stops water getting into the boot lid via the handle hole. For sliding window type cars the door locks use ADA3817.

On mk3 models the small door gasket on the Mk3 wind up window door hand...

($1.20) £1.20 exc vat

($1.44) £1.44 inc vat
NUMBER PLATE BACKING FRONT MK1
14A8455

Front number plate to the old original classic size 3.75"high by about 20.5"long overall. If you prefer a stainless steel plate to the later current legal size see 8B12390 which is 5.5" high and one inch longer

($11.50) £11.50 exc vat

($13.80) £13.80 inc vat
NUMBER PLATE REAR CHROME LAMP Mk1 & Mk2
BHA4153

Original chrome metal D shape type lamp as fitted to Mk1 and Mk2 Minis. Also used on many British cars in the 1960s. A plastic version is available as BHA4154 and 83H335 for black. Has the original hexagonal nut on body whic...

($27.71) £27.71 exc vat

($33.25) £33.25 inc vat