(1 006,76 €) £1 006.76 exc vat
(1 208,11 €) £1 208.11 inc vat
(1 006,76 €) £1 006.76 exc vat
(1 208,11 €) £1 208.11 inc vat
Recommended usage 1 x C-AUD640 to fit one mini.
This fitting kit suits all later day 1.25" and 1.5" twin carb set ups where the balance rods between the carbs required are equal length (2.25"), some early carbs had the balance bar with a triangular plate that were a shorter length. The kit has the...
Gasket for an HS4-carb and manifold .Sold seperately and order as required for your car(usually 3).
Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER
Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER
Throttle return springs for all twin carb variants. Usually 3 fitted.
Return spring kit for HS4 carburettor spindle.
Fuel or water T piece adaptor
used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications
This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.
Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.
Orange ...
Our heavy duty throttle cable is superior in many ways.
A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.
Cable to carb bolt is ACC5062.
A very usefull tuning needle for single and twin carbs when camshaft change for carbs with floating needles.
Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.
Orang...
Correct and original thickness oil for SU carb dashpots.
Stainless steel twin HS4 heatshields kit. Comes with Link bar and springs.
Complete with screw the choke trunnion is used on nearly all SU carb linkages.
See ACC5062 for carb cable link trunnion also.
This is the right hand linkage lever taht sits on the rods between HS type twin carbs. Sold individually
Early single HS" carbs had these splendid looking brass top dashpot dampers which are interchangeable with the plastic type.
Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.
Locating rings originally made for 12G295 heads with twin carbs to line up the inlet manifold to the inlet ports on the cylinder head it found its way on most twin carb factory produced cars. There is a recess in the inlet port on the he...
original shape of petrol feed pipe for twin HS" carbs as fitted to all the Coopers