ACCELERATOR CABLE RHD 1275 CARB MODEL 1990 ON

From 1990 1275 carb cooper fitted with HIF44 and non cooper fitted with HIF38 carb. Also use when fitting metro type carb. This is the right hand drive version except for injection cars.

For LHD use SBB10126 (2.5" shorter)

£10.40 exc vat

£12.48 inc vat

CARB TO MANIFOLD GASKET 1.75" (HS6 and all HIF)

88G429B

Mini Spares own performance upgrsded paper gasket that sits either side of the carb to manifold spacer on HIF38/44 type 1.75" carbs.Sold singly, order quantity as required to suit your car.

£0.42 exc vat

£0.50 inc vat

SPI TO HIF44 CARB CONVERSION KIT

C-STN23

To convert a standard UK spec Single Point Injection car to HIF44 carb. This kit includes wiring looms,fuel tank,fuel pump, carb, air filter and inlet manifold.

£1,424.57 exc vat

£1,709.48 inc vat

HS4 CARBURETTOR WITH WAXSTAT JET

FZX3013

HS4 carb with waxstat type jet--large soild metal bottomed jet,see FZX3003 for earlier red plastic jet

FZX3003 has ABP needle CUD1037, FZX3013 has AAC needle CUD1002.

£513.80 exc vat

£616.56 inc vat

HIF44 CARB LINKAGE

LZX1739

£28.98 exc vat

£34.78 inc vat

HOSE CLIP 8-12MM

GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

£1.16 exc vat

£1.39 inc vat

CONVERSION KIT waxstat to standard jet (linkage on...

BFS701SUL

Linkage set for Converting from waxstat to standard type jet for one single carb .

£20.28 exc vat

£24.34 inc vat

CARB HIF44 FULL REBUILD KIT EXCEPT TURBO

CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

£97.68 exc vat

£117.22 inc vat

CARB HIF38/44 ABUTMENT BRACKET

CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat

CARB BALANCER TOOL

MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

£28.50 exc vat

£34.20 inc vat

FLOAT REP KIT for HIF CARBS

WZX1509A

This float is ethanol tolerant and will fit all HIF38/44 carbs and the spindle is CUD2082 ..Quantity required-1 set for single carb.

Turbo uses WZX1095 needle valve. An expensive puncture proof stay up float is av...

£43.25 exc vat

£51.90 inc vat

HIF44 JET ASSEMBLY

WZX1453A

jet assembly (0.100") for the HIF44 carb only- see MGM10008 for HIF38(0.090")

£25.76 exc vat

£30.91 inc vat

STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")

CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

£0.78 exc vat

£0.94 inc vat

22" BRAIDED PETROL PIPE 1/4" BORE

PPK7

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...

£7.30 exc vat

£8.76 inc vat

PETROL PIPE HOSE 1 METRE

PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

£3.27 exc vat

£3.92 inc vat

NEEDLE BFY SWINGING TYPE - HIF44 COOPER 90 on

NZX8071

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement. They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed sol...

£8.25 exc vat

£9.90 inc vat

NEEDLE BDK SWINGING - HIF6

NZX8010

Spring loaded needle for the HIF44 carb.

£8.25 exc vat

£9.90 inc vat

NEEDLE BDL SWINGING - 1300 HIF44 & KN ELEMENT

NZX8011

Swinging type needle, usefull for 256 degree duration camshaft with standard filter, see BDK NZX8010 for K&N filter.

£8.25 exc vat

£9.90 inc vat

NEEDLE BDP

NZX8014

Known as a swinging needle because they sit on a spring which locates into the hat/cup end of the needle and have sideways movement.They start with part number prefix CUD for HS type carbs--NZX for HIF carbs--the earlier H and HS type were fixed soli...

£8.25 exc vat

£9.90 inc vat

HS2 CARB DASHPOT COVER - ALLOY

R22

Brighten up your engine bay with these bright alloy carb covers. These fit HS2 1.25" type carbs only- see R22BLUE and R22RED

£13.74 exc vat

£16.49 inc vat

15" BRAIDED PETROL PIPE 1/4" BORE

PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

£4.24 exc vat

£5.09 inc vat

HS2 CARB DASHPOT COVER - RED

R22RED

brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only- see R22BLUE and R22 for chrome look

£12.89 exc vat

£15.47 inc vat

HIF GASKET AND SEAL KIT

WZX1505A

Gaskets and spindle/float lid seals for all the HIF38/44 range.

For HIF38 service kit see CSK94 for mini and CSK78 for metro

for HIF44 see CSK75[/lonk] except turbo

[link]CRK167 rebui...

£14.81 exc vat

£17.77 inc vat