CONVERSION KIT waxstat to standard jet (linkage on...
BFS701SUL

(¥20) £20.28 exc vat

(¥24) £24.34 inc vat

In stockIn stock
Linkage set for Converting from waxstat to standard type jet for one single carb .

(¥20) £20.28 exc vat

(¥24) £24.34 inc vat

In stockIn stock

Recommended usage 1 x BFS701SUL to fit one mini.

Recommended products
CARB JET HS4 MINI TYPE RED
AUD9451A

Original type jet with red plastic end for HS4 carbs---If you have the later nylon coated jet see part number LZX1111A.

(¥12) £12.00 exc vat

(¥14) £14.40 inc vat
People also bought products
VITON TIPPED FLOAT NEEDLE VALVE FOR HS CARBS
VZX1100

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

(¥10) £9.75 exc vat

(¥12) £11.70 inc vat
GENUINE SU HS STAYUP FLOAT KIT
WZX1304

The new adjustable height StayUp® Float is resistant to modern ethanol based Fuels and has a military spec closed cell construction making it puncture proof. The ability to adjust the Float Arm allows for quick and easy minor alterations to Float lev...

(¥20) £19.60 exc vat

(¥24) £23.52 inc vat
RETURN SPRING KIT FOR HS4
WZX1335

Return spring kit for HS4 carburettor spindle.

(¥8) £7.65 exc vat

(¥9) £9.18 inc vat
JET ASSEMBLY R/H TWIN HS4
AUD9102

Also denoted by its black plastic base. Twin HS4 carbs have 30 degree float bowl angles and therefore this jet is easier to fit as it is longer. L/H carb uses AUD9098A std single HS2 jet.



For...

(¥11) £11.25 exc vat

(¥14) £13.50 inc vat
HOSE CLIP 8-12MM
GHC108012

Small hose clip for 1/4" fuel line (our part number PETROLPIPE)

(¥1) £1.16 exc vat

(¥1) £1.39 inc vat
ANCHOR TAG ON CARB
12A4

(¥1) £0.66 exc vat

(¥1) £0.79 inc vat
CARB HIF44 FULL REBUILD KIT EXCEPT TURBO
CRK167

complete overhaul kit for non turbo HIF44 carb includes needle valve and throttle shaft plus spindle--See CSK75 for service kit less spindle and disc

(¥98) £97.68 exc vat

(¥117) £117.22 inc vat
PETROL PIPE BRAIDED 5/16" BORE X 2.5"
21A2332

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

(¥2) £2.15 exc vat

(¥3) £2.58 inc vat
CARB HIF38/44 ABUTMENT BRACKET
CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

(¥12) £11.93 exc vat

(¥14) £14.32 inc vat
HIF44 CARBURETTOR
FZX3006

THIS CARB IS A GREAT TUNING AID ON TUNED ENGINES, ESPECIALLY 1380cc.

(¥624) £624.18 exc vat

(¥749) £749.02 inc vat
T PIECE 5/16"
MTP002

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

(¥4) £4.28 exc vat

(¥5) £5.14 inc vat
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

(¥29) £28.50 exc vat

(¥34) £34.20 inc vat
CARB HS4 SERVICE KIT SU 1.5"
WZX1852

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

(¥55) £55.31 exc vat

(¥66) £66.37 inc vat
CARB BUTTERFLY KIT 1.5"
WZX1323

this is the plain butterfly disc for the HS4 1.5" carb and if you have the air valve type butterfly disc see WZX1325

(¥15) £14.81 exc vat

(¥18) £17.77 inc vat
JET BEARING KIT HS4
WZX1442

Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

(¥22) £21.77 exc vat

(¥26) £26.12 inc vat
JET ASSY HIF38 1275cc
WZX1455A

jet for HIF38 carb and is 0.090 size--for HIF44 see WZX1453A

(¥17) £16.97 exc vat

(¥20) £20.36 inc vat
SPINDLE KIT HIF44-EARLY METRO
WZX1127

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

(¥20) £19.61 exc vat

(¥24) £23.53 inc vat
FLOAT NEEDLE/SEAT FOR HIF38/44 LARGER TYPE VALVE
WZX1099A

Fitted to HIF38 and HIF44 carbs, ethanol tolerant product. Bigger bodied valve.

For turbo models see WZX1095 .Quantity required-1

(¥20) £20.43 exc vat

(¥25) £24.52 inc vat
SPINDLE KIT HS4 1.5"
WZX1177

throttle spindle kit for single HS4 type carbs-.Quantity required-1 kit. -the butterfly is available seperately as WZX1323 for plain-WXZ1325 with air valve

(¥14) £13.50 exc vat

(¥16) £16.20 inc vat
CARB SPINDLE KIT 1.1/4" HS2
WZX1310

spindle and fixings only for the HS2 carb-the butterfly for this is WZX1320.

sorry folks but buying both kits you get double the gaskets

(¥12) £11.70 exc vat

(¥14) £14.04 inc vat