2.25" long universal stud 5/16"UNC one end and unf for the nut end. This fits the gearbox to flywheel case (6 of) and inlet manifolds to take HIF carbs when large spacer fitted. For carbs with no spacer see CHS2515 or CHS2613

Gasket for an HS4-carb and manifold .Sold seperately and order as required for your car(usually 3).

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

Throttle return springs for all twin carb variants. Usually 3 fitted.

Fuel or water T piece adaptor

used when upgrading fuel system size on specials from 1/4" to 5/16" or any other modifications

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orang...

Original type jet with red plastic end for HS4 carbs---If you have the later nylon coated jet see part number LZX1111A.

For HS4 twin non waxstat carbs with red jet this is the full rebuild kit with the spindle and plain throttle disc and bushes--- see WZX1859 for service kit

This is the right hand linkage lever taht sits on the rods between HS type twin carbs. Sold individually

Pair of heatshield brackets and cross bar

these are made similar to the original cooper HS2 design but ARE for HS4 (1.5")carbs and include the 3 correct springs that attach to the bridging bar for choke return linka...

Locating rings originally made for 12G295 heads with twin carbs to line up the inlet manifold to the inlet ports on the cylinder head it found its way on most twin carb factory produced cars. There is a recess in the inlet port on the he...