(¥23) £22.50 exc vat
(¥27) £27.00 inc vat
In stock
This has 4 flutes and is R/H
(¥23) £22.50 exc vat
(¥27) £27.00 inc vat
In stockRecommended usage 1 x MS30R to fit one mini.
This R/H sill(rocker)panel has the correct 4 pressed vent hole shapes, but is of a revised design supplied by Rover where the vents lay slightly further back into the body. But we suggest you fit MS30R the correct shape 4" Non Genuine p...
The oversill panel includes the horizontal external seam and wraps all the way down with a lip that meets the horizontal part of the floor. 4 flute type as per pre 1970 cars but for 6 flutes see MS55R
This is the bracket that the AFU4092 lamp locate into. It is welded to the cant rail.
Lightened and strengthened dry rear subframe for competition use. No radius arm brackets included as most will be replaced for adjustable brackets.
Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.
Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!
Non genuine MK1/2 full floor pan less x member, front to rear with inner sills only --For van/estate see 24A604
This floor is 4 vent sill with round tunnel only for the MK1/2 but you will have to cut and shape the gear lever hol...
Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623
Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.
The gasket that sits behind the door stiker on all wind up window type minis
on the B post.
MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.
Metal floor plug as per original with rubber seal.
For use in 1" hole.
Non genuine double skin MKI boot lid. Always fix your swinging number plate and hinges on for dummy fit and alignment before spraying.
This is the only double skin bootlid avaialble.
The Genuine double skin Mk2 type 8G927...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.