DISTRIBUTOR A PLUS ELECTRONIC NEG EARTH ONLY 1275C...
ADU3825MS

($58.50) £58.50 exc vat

($70.20) £70.20 inc vat

In stockIn stock
Negative earth A Plus 59D for any 1275cc with vac unit with modern day driving curves and petrol avaiable.

For best performance and tune we advise our electronic evolution version C-27H7701

Distributors can 'work' long past their useful life! Replacing points and condensor is NOT rebuilding a distributor. If you want to get the most from the performance of your engine a very good distributor is a must! replaces any metro 1275cc engine in a mini or metro--See ADU3825 for Type with contact breakers.



Should be used with GCL216 coil.





Range of modern day curve distributors from minispares-

GEU930 25D 850/early 998

12G2140 23D Cooper S non vac

BAU1962 45D 998/1098

ADU5789 59D 998 A plus

12G4180 45D 1275cc with vac, good for modified road tune engines

ADU3825 59D 1275 with vac, A Plus good for modified road tune

For electronic versions add suffix MS- example= ADU5789MS

Distributor drive spindle if required is 12G3560

Distributor clamp plate is TAM1671

Bolt for clamp is TAM1706

Mini Spares specification for best alround performance electric distributor for std to 276 camshaft profiles see C-27H7698

($58.50) £58.50 exc vat

($70.20) £70.20 inc vat

In stockIn stock

Recommended usage 1 x ADU3825MS to fit one mini.

Recommended products
DISTRIBUTOR CLAMP BOLT FOR A PLUS 85 ON
TAM1706

the bolt that holds distributor clamp TAM1671 in the block on A Plus engines

now obsolete use 3/8"unf bolt with thread length of 1"

($1.62) £1.62 exc vat

($1.94) £1.94 inc vat
DISTRIBUTOR CLAMP FOR A PLUS DIZZY 85 ON
TAM1671

Prong type clamp that bolts to the block and retains the A plus distributor in place. The screw is TAM1706.

Pre A plus clamp is 501134

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat
Alternative products
DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...
C-27H7701

A Plus Electronic Ignition distributor with vac unit, modified to our spec in UK to give best performance on any minis with std to 276 camshaft profile.

Ideal for our EVOLUTION001 camshaft

Brand New distributor complet...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat
DISTRIBUTOR 59D FOR 1275 WITH VAC-A PLUS ONLY
ADU3825

Range of distributors with modern day curves specially built,programmed and tested for Mini Spares in UK.

Beware of the cheap China made units that we have tested and currently offered by other vendors that are poorly made with wrong setting...

($45.00) £45.00 exc vat

($54.00) £54.00 inc vat
People also bought products
VICTOR REINZ LARGE BORE HEAD GASKET
GUG702560VR

Victor Reinz large bore head gasket for A-series engines.

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
CRANK THRUST WASHER SET STANDARD 998
ACL2122

Set of standard size 998 thrust washers.

($9.75) £9.75 exc vat

($11.70) £11.70 inc vat
TIMING COVER AND FRONT PLATE FITTING KIT
MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

($8.00) £8.00 exc vat

($9.60) £9.60 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20
C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat
SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +60
C-STN103-60

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
MINI 1275 CAM LINER SET
MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat
LOWER POLY STABILISER BUSH KIT
C-STR633

Stabiliser bush kit for lower engine steady

($14.40) £14.40 exc vat

($17.28) £17.28 inc vat
CRANK THRUST WASHER SET +0.30" 1275
ACL2136-030

Set of +0.030" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
CRANK THRUST WASHER SET +0.003" 1275
ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...
AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.



Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat
MAINS +10 1275CC A PLUS ONLY ACL RACE
C-AEM91886-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat
BIG ENDS +10 1300 EXCEPT COOPER S ACL RACE
C-AEB91306-10

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($71.69) £71.69 exc vat

($86.03) £86.03 inc vat
BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE
C-AEB91306-00

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($69.06) £69.06 exc vat

($82.87) £82.87 inc vat
SPORTS COIL FOR BALLASTED IGNITION SYSTEM 998 FROM...
MSC110

Sports coil for ballast resistor type ignition.

Best internal parts tested and another intermotor top product.

Its not the name on the outside but whats on the inside which matters.

Original type coil bracket 12G29...

($17.60) £17.60 exc vat

($21.12) £21.12 inc vat
SIMPLEX TENSIONER 6 PIECE SPECIAL KIT
MSSK051EVO

Parts required to stop timing chain rattle on A plus engine using special anti stretch single row chain 3H2127EVO.Last chance to buy with the plate and pin to hold the tensioner as they are obsolete from Rover.

Fitted to 998/110...

($35.16) £35.16 exc vat

($42.19) £42.19 inc vat
MINI MOKE STOP/TAIL RED LAMP
1B9101MS

rear stop and tail lamp for early BMc cars with red plastic lens.

Also stocked is a white lens and single filament bulb equivalent for use as reverse light on kits cars and Mokes as CHM13REVERSE.

($7.60) £7.60 exc vat

($9.12) £9.12 inc vat
PERFORMANCE 8mm PLUG LEAD SET RED
C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat