KEVLAR HEATER HOSE 1/2" BORE PER METRE

GRH1006KEVLAR

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

In stock

Without doubt the best hose to fit unles you are after the lovely silicon

extra strong and supple hoses. See GRH1006 for lengths required if you are not sure on your car.

($3.50) £3.50 exc vat

($4.20) £4.20 inc vat

In stock

Recommended usage 3 x GRH1006KEVLAR to fit one mini.

Radiator Hoses - Qty 1

Heater and Air Vents - Qty 1

Heater valves, hoses and controls - Qty 1

People also bought products

CYLINDER HEAD HEATER TAP FITTING KIT

ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

MK1 AIR INTAKE HOSE (RUBBER OVER WIRE)

24A1256

As fitted to MKI minis and variants. Original style tube of rubber material wrapped over a wire coil. As an improvement to the original design, these are also bonded to a nylon interior membrane for additional strength and the wire coil is galvenised...

($82.22) £82.22 exc vat

($98.66) £98.66 inc vat

EARLY MK1 HEATER MATRIX 59-63 ONLY

17H5019

The heater is not available anymore, but this matrix is the main component which gets blocked up or leaks, stopping it blowing hot air.

This fits the early Mk1 cars only with 5" gap between pipe hole centres, after 1963 17H8608

($147.50) £147.50 exc vat

($177.00) £177.00 inc vat

UNIVERSAL HEATER UNIT

C-ARA3000

Universal aluminium heater assembly complete with heater matrix and electric fan. Comes with 2 outlets for demisting windscreen and 2 variable vents for heating the rest of the car. Ideal for track/race cars or simply for those who want to replace th...

($148.50) £148.50 exc vat

($178.20) £178.20 inc vat

CYLINDER HEAD HEATER TAKE OFF OUTLET ALLOY 5/8"

12G2534ALLOY

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

($22.32) £22.32 exc vat

($26.78) £26.78 inc vat

HEATER VALVE GENUINE MINISPARES ORIGINAL SHAPE

ADU9102MS

Genuine Mini Spares heater valve. The original RANCO tooling has been scrappped so beware of some imports available where the inners quickly explode loosing the metal cap and all your water when operated.This has M4 metric thread bolt included for th...

($13.99) £13.99 exc vat

($16.79) £16.79 inc vat

SEAL FOR BETWEEN JEF10005 HEATER MATRIX AND TAKE O...

TRS1318

($0.50) £0.50 exc vat

($0.60) £0.60 inc vat

HEATER MATRIX OUTLET PIPES FOR JEF10005

JEP10008

Heater Matrix take off fixing kit, cars only-fits on heater matrix to take the 2 heater pipes on L/H side of car.

kit includes 2 brass take off pipes with 2 stainless steel bases and 2 water seals.

The outlet pipes are made in brass...

($27.72) £27.72 exc vat

($33.26) £33.26 inc vat

HEATER MATRIX RADIATOR 84-91

BAU5043

2 plastic 5/8" outlets at the same end and close together which exit the heater on the r/h side. The later HIF38 1275 and single point cars had a change point where the plastic outlets exited on the l/h. This is a JEF10005.

These units take ...

($39.00) £39.00 exc vat

($46.80) £46.80 inc vat

THERMOSTAT SANDWICH PLATE WITH OUTLET

PEG10002

1992 TO 1996 SANDWICH PLATE. SPI AND CARB MINIS. HAS TAPPED HOLE FOR RAD BRACKET STUD. NO SENDER HOLES. SPI MINIS USE WITH 12G103 TOP HOUSING, CARB MINIS USE WITH PEQ10010(THERMO SENDER HOLE AT FRONT).

($27.98) £27.98 exc vat

($33.58) £33.58 inc vat

PLUG 5/8UNF X 5/8 SCREW INLET MANIFOLD

5-8UNF

This plug fits our inlet manifolds and Rover types with servo take off holes..

5/8 UNF grub screw that use 8mm allen key for blanking inlet servo take off or temp transmitter hole at front of pre 1996 cylinder heads. Can also use ADP210

($1.00) £1.00 exc vat

($1.20) £1.20 inc vat

HEATER CONTROL CABLE 1969 TO 1988

CHM373

Fitted from approx 1969 to 1988 they replaced the original knob with the word PUSH and HEATER. This was done as a safety feature by having a rubber edge. The grommet in the body for this cable to pass through is CAM5969. Cable length is ...

($9.83) £9.83 exc vat

($11.80) £11.80 inc vat

AIR HOSE FOR HEATING FRESH AIR SYSTEM

CZH700

from air vent on dash to duct-about 5"(128.9mm)long with 2.5" diameter

($8.55) £8.55 exc vat

($10.26) £10.26 inc vat

HEATER MATRIX RADIATOR 1963 UP TO 1968/69

17H8608

The heater is not available any more, but this matrix is the main component which gets blocked up or leaks, stopping it blowing hot air. This is a new heater matrix for late MK1 plus MK2 cars has 4.5" gap between pipes with opposite outlets for cars ...

($118.50) £118.50 exc vat

($142.20) £142.20 inc vat

HEATER TAP GASKET

88G221

This gasket fits on the cylinder head for every A series heater valve or outlet pipe until the hole was no longer drilled when they changed to a heater valve fitted into the hose line from 1990 on.

($0.41) £0.41 exc vat

($0.49) £0.49 inc vat

HEATER MATRIX RADIATOR MK3 TO 1984

37H7216

The heart of your heater is the radiator matrix which often gets overlooked when cleaning the cooling system. They often get clogged and cannot be cleaned rendering your heater useless. Replacement is the only answer if flushing out does not clean it...

($55.50) £55.50 exc vat

($66.60) £66.60 inc vat

MOTIF FOR HEATER CABLE 1990on RED AND BLUE ARROW ...