Alloy bracket on the end of the gearbox for supporting the lower radiator bracket 12A361 to mount on. Second hand "USED" parts only as Rover no longer have stocks--cleaned but they are old used items but all perfectly servicable
The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost square cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubbe...
This hose is exact length for the clubman 1000/1100cc range and will need slightly shortening for the first generation MK1 mini radiators where the outlet was on the very end of the top tank instead of 1.5" inward towards centre which is how all radi...
The heater outlets exit on L/H and are horizontal for 5/8"hose fitting.
The outlets for this mod come seperately, as part number JEP10008.
Very front left hand air nozzle behind the grille on injection cars - earlier cars used CZH1318
MPI alloy billet thermostat housing. Useful for any radiator fitted in front of the engine this housing has an outlet pipe for the expansion tank.
The original tooling is no longer available and believed scrapped. Supplied with 2 gaskets.
Once the old type alloy heater valve on the head was discontinued in 1990 for the plastic free floating inline type this take off union was fitted in its place on A series engine cars for use with the larger 5/8" hose. Uses 88G221 gasket...
From the Heater assembly to air distribution box on the right hand side of the heater and is internal. 45cm long.
Larger bore at thermostat end requiring larger clip GHC811 Radiator end.
This hose has the standard size bore for the radiator but the thermostat end is larger as fitted to the Carb Cooper from 1990/1 and used the old metro type...
Side mounted as per all pre 1996 cars. UK made with 2 core tubes. V shape fins 20 per inch the BIG Daddy of all rads.
This is a super cool lightweight alloy radiator BUT FOR PRE 1990 cars as it has the overflow pipe facing backwards.
Looks different to other housings with its flatter top, it also has a small outlet which is drilled for expansion tank overflow. It was also used without the drilled hole (PEQ10019)on cooper models from 1990-1 as it offers more flow through its large...
FITS INTO SANDWICH PLATE ON CARB COOPER HAS M8 THREAD 8MM WIDE
Lower Radiator Hose-See C-GRH1159 silicon hose also which is priced to sell.
The lower hose on the late model Mini is VERY different! You've got to have one of these when you need it!!! Typically found on all Minis 1990-1991 wi...
Mini Spares own product,the most complicated hose on a mini yet? If you have a front mounted radiator such as on the twin point injection cars you will have this brainchild of a hose fitted. Hose clips/joiners not included.
A low oil pressure warning light switch is available to help protect the engine. The standard one comes on at 7lb-much too late to avoid damage. This one comes on at 20lb and is adjustable up to 120lb. Please note this is now a twin terminal switch, ...
genuine Mocal UK cooler.This is the ideal size for minis, but everybody goes for the 13 row type cooler radiator C-ARH221 which was fitted to the Cooper S eventually as standard but that was over 30 years ago, before the later type oils ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.