large pipercoss foam air filter element for HS2 twin cabs--Will need slight modifications to fit sprite and midgets as distance between inlet manifold ports is slightly different.

Perfectly round float bowl gasket for the early H type carbs as used by Special

Tuning.Later type HS carbs had 3 screw holes in the gasket and a different size.

see AUC8459 for HS2/4/6

Worn throttle spindles cause erratic performance from your carb and sometimes the housing gets worn--These are the bushes to repair worn carbs when replacing spindles for HS2 carbs. As a guidline 0.250" internal diameter and ream carb bo...

The spacer block for between manifold and HS2 single carbs and use 1G2624 gaskets (3 of).

These screws fit all HS type carb butterflies to hold them on the throttle spindle

For HIF Turbo only single carbs this is the very least of the parts required for an overhaul kit-if you require the spindle and disc and bushes see CRK269

This dashpot carb damper is for the HIF38 1.5"SU as fitted on original 1990s 1275 minis except Coopers with HIF44 carb, but was also used on some Metro HIF44 carbs. check the number on your old one.