Showing 161 to 180 of 482

rich needle single HS2 carb sold per item--standard needle on twin HS2-sold quantity is one-2 required for twin HS2

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

This throttle return spring fitted every HS2/4 single SU carb and also on the twins as fitted by the factory. Twin carbs used AEC2075 for choke return. Total length 90mm.

7" long steel intake manifold by Maniflow for Weber 45 DCOE/DHLA

Usefull for 266 degree duration camshaft with K&N filter.

This is one of the best looking gas caps you will ever add to you car. Very high polished chrome with a flare. The 'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza...

This combined fuel filter and regulator allows adjustment of fuel pressure for optimum power and fuel economy.The inlet and outlet unions are universal for either 1/4" or 5/16" hoses. The FPR004 is a glass dome version of the alloy bodie...

For use on the Facet range of solid state fuel pumps.

HS4 carb with waxstat type jet--large soild metal bottomed jet,see FZX3003 for earlier red plastic jet

FZX3003 has ABP needle CUD1037, FZX3013 has AAC needle CUD1002.

Not Built up= A Complete kit of HS4 CARBS/ MANIFOLD/LINKAGE LESS AIR CLEANER

original shape of petrol feed pipe for twin HS" carbs as fitted to all the Coopers

Locating rings originally made for 12G295 heads with twin carbs to line up the inlet manifold to the inlet ports on the cylinder head it found its way on most twin carb factory produced cars. There is a recess in the inlet port on the he...

Arrow previous
Arrow next
7 8 9 10 11 ...