Fits all carbs with the swinging type needle.

£5.42 exc vat

£6.50 inc vat

STUD FOR SCREW ON OIL FILTER PLUS HS2 CARB

3/8"unc 1.6250" long stud for engine block to accept the TAM2097 screw on filter head and for HS2 carbs, alternative to this is CHS2614 1.75" long and just over one thread longer. LYG10008 bolt was ...

£1.68 exc vat

£2.02 inc vat

NEEDLE AAP SWINGING TYPE

CUD1013

£8.25 exc vat

£9.90 inc vat

TWIN HS4 CARBURETTORS SU PAIR (1.5")

C-AUD640

Pair of new 1.5" SUs, with rod linkage, but no heatshield, fuelpipe or manifold; just what you want if you've got a pair of old tired carbs. You will need a 12H889 T piece or 12G292 link pipe to run the fuel system if your o...

£1,006.76 exc vat

£1,208.11 inc vat

MANIFOLD INLET HS4 1.5 BORE SIZE L149

C-AEG490

The Maniflow steel intake manifold has established the standard by which all others measure themselves. This manifold is specially designed to maximize air flow within the space requirements of a Mini. It accepts either twin 1 1/2" or twin 1 3/4" ...

£178.29 exc vat

£213.95 inc vat

RAM STAX H4/HS4 LONG

C-AHT248

2.5" long ram pipe for 1.5" SU.

General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a con...

£55.49 exc vat

£66.59 inc vat

LINKAGE ROD FOR TWIN CARB LINKAGE

AUC1457

Rod with chamfered ends about 57.2mm long(shorten to 54mm for twin HS4) which has AUE586 and AUE587 clamps on to fit between SU twin carbs for the linkage. Quantity of One is usually required per set up plus a 12A31...

£2.15 exc vat

£2.58 inc vat

HIF CARB FLOAT LID SCREW

AUD3590

float lid screw for all HIF type SU carbs

£0.47 exc vat

£0.56 inc vat

CARB SPRING RED 4.5oz HIF CARBS ONLY

AUD4355

Standard weight 4.5 ounce spring colour coded red for HIF type carbs only.

There is an optional heavier spring coloured yelow at 8oz.

£7.59 exc vat

£9.11 inc vat

RAM STAX HS2 LONG

C-AHT246

2.5" long ram pipe for 1.25" SU.

General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a con...

£55.49 exc vat

£66.59 inc vat

NEEDLE AEM SWINGING - HIF38 MINI

NZX4036

£8.25 exc vat

£9.90 inc vat

CARB DASHPOT DAMPER METRO TURBO HIF44

LZX1505A

Dashpot damper for the HIF6 METRO Turbo carb plus many other variants of the Metro.Rover played around with these dampers with different length rods so look for the number on the topof your old one.

£18.95 exc vat

£22.74 inc vat

HS4 DASHPOT COVER - RED

R23RED

Brighten up your engine bay area with these bright alloy carb covers --these fit HS4 1.5" type carbs only- see R23BLUE and R23 for chrome look.

£12.89 exc vat

£15.47 inc vat

CARB DASHPOT DAMPER HIF44 MINI COOPER 1990-92

LZX2085

The correct one for the origianl HIF44 carbs fitted to 1990-92 1275cc Coopers

£23.52 exc vat

£28.22 inc vat

FLOAT LID ASSEMBLY FOR HS2 & HS4 CARBURETTORS

AUE266

HS2 float lid assy, also fits HS4.

A rare chance to do something the easy way and at the same time do it right. A new plastic float, pin, plus needle & seat assembly are already installed into a new float cover lid. Simply remov...

£73.32 exc vat

£87.98 inc vat

TWIN HS2 1.25" CARBURETORS

AUD662

A pair of 1.25" SU carbs only. Originally fitted to Coopers but now with swinging needles rather than the original fixed type.MSSK008 for heatshield. See C-AHT245 & C-AHT246 for ram pipes. Supplied with CUD1002 ...

£1,006.76 exc vat

£1,208.11 inc vat

TWIN HS2 INLET MANIFOLD

C-AEG488

Cast alloy type,this intake manifold for twin 1.25"SUs (H2 or H4 -- NOT HS4)

It has been carefully produced to minimize cross-port-flow interference caused by the balance tube and has generous radii in all the right places. Further blending ...

£60.00 exc vat

£72.00 inc vat

RAM STAX HS2 SHORT

C-AHT245

1.5" long ram pipe for 1.25" SU.

General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a co...

£55.49 exc vat

£66.59 inc vat

STUD HIF CARB TO MANIFOLD PLUS GEARBOX CASE

22A152

2.25" long universal stud 5/16"UNC one end and unf for the nut end. This fits the gearbox to flywheel case (6 of) and inlet manifolds to take HIF carbs when large spacer fitted. For carbs with no spacer see CHS2515 or CHS2613

£2.40 exc vat

£2.88 inc vat

RAM STAX H4/HS4 SHORT

C-AHT247

1.5" long ram pipe for 1.5" SU.

General:

Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a con...

£55.49 exc vat

£66.59 inc vat