(0,07 €) £0.07 exc vat
(0,08 €) £0.08 inc vat
(0,07 €) £0.07 exc vat
(0,08 €) £0.08 inc vat
Recommended usage 1 x GFK1124 to fit one mini.
Specially designed for twin point injection cars. This kit has the 2 overiders and corner bars plus a stainless steel bumper with the pre stamped hole, plus fixings, for cars with 4 front driving lamps as fitted by Rover from 1997 on. Owing to the 4 ...
Car set of fixings to hold on the Deluxe type overiders and corner bars, complete with sealing rubber to bumper and spacers.
If you have standard overiders see kit MSSK011.
Stainless steel twin HS2 heatshields kit. Comes with link bar, bolts, nuts and springs.
Stainless steel twin HS4 heatshields kit. Comes with Link bar and springs.
This kit has 2 special overiders and 2 slightly shorter corner bars
for fitting to cars with 4 driving lamps when fitted as original equipment by the factory on all Twin point injection cars. This special kit was designed by Keith Dodd for ...
Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.
The "Deluxe" models of all Minis included bumpers with these fancy over-riders and corner bars. This rear only kit is designed to provide you all the pieces; including, all the bits and the bumpers!
Includes bumper, the complete overrid...
Complete nut, bolt and washer set for engine to gearbox only
Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:
Inlet/Exhaust manifold to head, studs/nuts/washers
Thermostat housing (no sandwich plate) studs/nuts/washers
H...
Complete fitting kit for the door check straps on all Minis fitted with external hinges.
Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket
Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).
This kit includes all hardware to fit suspension to your front subframe. Also includes front damper mounting hardware and lower arm pins.
Boot hinge gaskets and fittings for original type hinges
Washer for 17H2646ORIGINAL brake servo non return valve
Shakeproof star washer 3/16"unf sold individually-order quantity as required
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will ...
New set of metric studs, bolts, nuts and washers as supplied with the alloy external hinge kit (PEASE NOTE: This kit is NOT suitable for the original hinges). The studs have allen key socket ends to help put them into the hinge easily without damage,...