Correct and original thickness oil for SU carb dashpots.

complete rebuild kit for Turbo type HIF44 carbs including needle valve and throttle spindle plus disc.With damper clamp ring as fitted to turbo only

Carb repair kit less spindle and butterfly for single HS4 carbs-includes float needle valve and jet. Full repair kit with spindle etc is CRK227-----for waxstat type see CRK121, This kit is suitable for pre Waxstat (pre 74) Minis only

Service repair kit for the HIF38 carb (1.5") fitted to the first 1275 engined cars in 1990s such as the sprite.

For HS4 single carbs this is the very least of the parts required for an overhaul kit. If you require the spindle and disc and bushes see CRK121.

Pre waxstat with the red jet is CRK227.

Complete service kit from "SU" includes all the bits needed for a very complete rebuild of your twin HS2 or HS4 carbs; Carb repair kit less spindle and butterfly -includes float needle valve and jet. Full repair kit see [lin...

For 21A2331 pipe. Before the days of Aeroquip, Minis had braided petrol pipes. They should be used in place of rubber for all fuel lines where possible. This is 5/16" bore size for the joining pipe on twin tanks using the original pipe ...

spindle and fixings only for HIF44, only with one end threaded as opposed to WZX1128 which is threaded both ends-see WZX1183 for disc

Float needle valve for turbos fitted with standard HIF44 carb. Larger bodied valve.

Inlet size is 0.096". See also WZX1090 smaller bodied valve HIF6 MG Turbo

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

The little spring that sits at the end of a spring loaded carb needle on late HS and all HIF carbs where applicable.